diff options
Diffstat (limited to 'config/polybar/pwidgets')
23 files changed, 4428 insertions, 0 deletions
diff --git a/config/polybar/pwidgets/apps.ini b/config/polybar/pwidgets/apps.ini new file mode 100644 index 0000000..48335e1 --- /dev/null +++ b/config/polybar/pwidgets/apps.ini @@ -0,0 +1,426 @@ +;; ┌────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Global WM Settings + +[global/wm] +; Adjust the _NET_WM_STRUT_PARTIAL top value +; Used for top aligned bars +margin-bottom = 0 + +; Adjust the _NET_WM_STRUT_PARTIAL bottom value +; Used for bottom aligned bars +margin-top = 0 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; File Inclusion +; include an external file, like module file, etc. + +include-file = ~/.config/polybar/pwidgets/colors.ini + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Bar Settings + +[bar/main] +; Use either of the following command to list available outputs: +; If unspecified, the application will pick the first one it finds. +; $ polybar -m | cut -d ':' -f 1 +; $ xrandr -q | grep " connected" | cut -d ' ' -f1 +monitor = + +; Use the specified monitor as a fallback if the main one is not found. +monitor-fallback = + +; Require the monitor to be in connected state +; XRandR sometimes reports my monitor as being disconnected (when in use) +monitor-strict = false + +; Tell the Window Manager not to configure the window. +; Use this to detach the bar if your WM is locking its size/position. +override-redirect = false + +; Put the bar at the bottom of the screen +bottom = true + +; Prefer fixed center position for the `modules-center` block +; When false, the center position will be based on the size of the other blocks. +fixed-center = true + +; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in a width or height of 50% minus 10 pixels +width = 230 +height = 60 + +; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in an offset in the x or y direction +; of 50% minus 10 pixels +offset-x = 0 +offset-y = 0 + +; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) +background = ${color.bg} + +; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) +foreground = ${color.fg} + +; Background gradient (vertical steps) +; background-[0-9]+ = #aarrggbb +;;background-0 = + +; Value used for drawing rounded corners +; Note: This shouldn't be used together with border-size because the border +; doesn't get rounded +; Individual top/bottom values can be defined using: +; radius-{top,bottom} +radius-top = 20.0 +radius-bottom = 20.0 + +; Under-/overline pixel size and argb color +; Individual values can be defined using: +; {overline,underline}-size +; {overline,underline}-color +line-size = 2 +line-color = ${color.ac} + +; Values applied to all borders +; Individual side values can be defined using: +; border-{left,top,right,bottom}-size +; border-{left,top,right,bottom}-color +; The top and bottom borders are added to the bar height, so the effective +; window height is: +; height + border-top-size + border-bottom-size +; Meanwhile the effective window width is defined entirely by the width key and +; the border is placed withing this area. So you effectively only have the +; following horizontal space on the bar: +; width - border-right-size - border-left-size +border-bottom-size = 0 +border-color = ${color.ac} + +; Number of spaces to add at the beginning/end of the bar +; Individual side values can be defined using: +; padding-{left,right} +padding = 2 + +; Number of spaces to add before/after each module +; Individual side values can be defined using: +; module-margin-{left,right} +module-margin-left = 1 +module-margin-right = 1 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; Fonts are defined using <font-name>;<vertical-offset> +; Font names are specified using a fontconfig pattern. +; font-0 = NotoSans-Regular:size=8;2 +; font-1 = MaterialIcons:size=10 +; font-2 = Termsynu:size=8;-1 +; font-3 = FontAwesome:size=10 +; See the Fonts wiki page for more details + +font-0 = "Iosevka Nerd Font:size=12;2" +font-1 = "Iosevka Nerd Font:bold:size=24;2" +font-2 = "Iosevka Nerd Font:size=22;6" + +; Modules are added to one of the available blocks +; modules-left = cpu ram +; modules-center = xwindow xbacklight +; modules-right = ipc clock + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[bar/primary] +inherit = bar/main +offset-x = 25 +offset-y = 25 + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-center = web sep2 files sep2 edit sep2 apps +enable-ipc = true + +[bar/secondary] +inherit = bar/main +offset-x = 25 +offset-y = 75 +background = ${color.trans} +foreground = ${color.white} + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-left = date sep mpd +enable-ipc = true + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; The separator will be inserted between the output of each module +separator = + +; Opacity value between 0.0 and 1.0 used on fade in/out +dim-value = 1.0 + +; Value to be used to set the WM_NAME atom +; If the value is empty or undefined, the atom value +; will be created from the following template: polybar-[BAR]_[MONITOR] +; NOTE: The placeholders are not available for custom values +wm-name = + +; Locale used to localize various module data (e.g. date) +; Expects a valid libc locale, for example: sv_SE.UTF-8 +locale = + +; Position of the system tray window +; If empty or undefined, tray support will be disabled +; NOTE: A center aligned tray will cover center aligned modules +; +; Available positions: +; left +; center +; right +; none +tray-position = none + +; If true, the bar will not shift its +; contents when the tray changes +tray-detached = false + +; Tray icon max size +tray-maxsize = 16 + +; Background color for the tray container +; ARGB color (e.g. #f00, #ff992a, #ddff1023) +; By default the tray container will use the bar +; background color. +tray-background = ${color.background} + +; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +tray-offset-x = 0 +tray-offset-y = 0 + +; Pad the sides of each tray icon +tray-padding = 0 + +; Scale factor for tray clients +tray-scale = 1.0 + +; Restack the bar window and put it above the +; selected window manager's root +; +; Fixes the issue where the bar is being drawn +; on top of fullscreen window's +; +; Currently supported WM's: +; bspwm +; i3 (requires: `override-redirect = true`) +;;wm-restack = + +; Set a DPI values used when rendering text +; This only affects scalable fonts +; dpi = + +; Enable support for inter-process messaging +; See the Messaging wiki page for more details. +;enable-ipc = true + +; Fallback click handlers that will be called if +; there's no matching module handler found. +click-left = +click-middle = +click-right = +scroll-up = +scroll-down = +double-click-left = +double-click-middle = +double-click-right = + +; Requires polybar to be built with xcursor support (xcb-util-cursor) +; Possible values are: +; - default : The default pointer as before, can also be an empty string (default) +; - pointer : Typically in the form of a hand +; - ns-resize : Up and down arrows, can be used to indicate scrolling +cursor-click = +cursor-scroll = + +;; WM Workspace Specific + +; bspwm +;;scroll-up = bspwm-desknext +;;scroll-down = bspwm-deskprev +;;scroll-up = bspc desktop -f prev.local +;;scroll-down = bspc desktop -f next.local + +;i3 +;;scroll-up = i3wm-wsnext +;;scroll-down = i3wm-wsprev +;;scroll-up = i3-msg workspace next_on_output +;;scroll-down = i3-msg workspace prev_on_output + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Application Settings + +[settings] +; The throttle settings lets the eventloop swallow up til X events +; if they happen within Y millisecond after first event was received. +; This is done to prevent flood of update event. +; +; For example if 5 modules emit an update event at the same time, we really +; just care about the last one. But if we wait too long for events to swallow +; the bar would appear sluggish so we continue if timeout +; expires or limit is reached. +throttle-output = 5 +throttle-output-for = 10 + +; Time in milliseconds that the input handler will wait between processing events +;throttle-input-for = 30 + +; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events +screenchange-reload = false + +; Compositing operators +; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t +compositing-background = source +compositing-foreground = over +compositing-overline = over +compositing-underline = over +compositing-border = over + +; Define fallback values used by all module formats +;format-foreground = +;format-background = +;format-underline = +;format-overline = +;format-spacing = +;format-padding = +;format-margin = +;format-offset = + +; Enables pseudo-transparency for the bar +; If set to true the bar can be transparent without a compositor. +pseudo-transparency = false + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; ┌────────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/date] +type = internal/date + +interval = 1.0 +time = %k:%M + +format = <label> +format-foreground = ${color.fg} +label = %time% +label-font = 2 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/mpd] +type = internal/mpd + +interval = 2 + +format-online = <label-song> +format-online-foreground = ${color.fg} + +label-song = "%title%" +label-song-maxlen = 12 +label-song-ellipsis = true +label-offline = "Offline" + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Apps + +[module/term] +type = custom/text + +content = "%{T3}%{T-}" +content-foreground = ${color.black} +content-background = ${color.bg} +content-padding = 0 + +click-left = termite & + +[module/web] +type = custom/text + +content = "%{T3}%{T-}" +content-foreground = ${color.orange} +content-background = ${color.bg} +content-padding = 0 + +click-left = firefox & + +[module/files] +type = custom/text + +content = "%{T3}%{T-}" +content-foreground = ${color.blue} +content-background = ${color.bg} +content-padding = 0 + +click-left = thunar & + +[module/edit] +type = custom/text + +content = "%{T3}%{T-}" +content-foreground = ${color.gray} +content-background = ${color.bg} +content-padding = 0 + +click-left = geany & + +[module/apps] +type = custom/text + +content = "%{T3}%{T-}" +content-foreground = ${color.fga} +content-background = ${color.bg} +content-padding = 0 + +click-left = ~/.config/polybar/pwidgets/scripts/launcher.sh & +click-right = ~/.config/polybar/pwidgets/scripts/style-switch.sh & + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/sep] +type = custom/text +content = " | " +content-font = 1 + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +[module/sep2] +type = custom/text +content = " " + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/config/polybar/pwidgets/colors.ini b/config/polybar/pwidgets/colors.ini new file mode 100644 index 0000000..13accb3 --- /dev/null +++ b/config/polybar/pwidgets/colors.ini @@ -0,0 +1,42 @@ +;; ┌────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█░░░█▀█░█▀▄░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░░░█░█░█▀▄░▀▀█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀▀▀░▀▀▀░▀░▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[color] +bg = #FFFFFFFF +fg = #FFFFFFFF +ac = #FF1565C0 +fga = #FF454545 + +trans = #00000000 +white = #FFFFFF +black = #000000 + +;; Material Colors + +red = #e53935 +pink = #d81b60 +purple = #8e24aa +deep-purple = #5e35b1 +indigo = #3949ab +blue = #5895DC +light-blue = #039be5 +cyan = #00acc1 +teal = #00897b +green = #43a047 +light-green = #7cb342 +lime = #c0ca33 +yellow = #FEC006 +amber = #ffb300 +orange = #F57C00 +deep-orange = #f4511e +brown = #6d4c41 +gray = #757575 +blue-gray = #546e7a + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/config/polybar/pwidgets/cpu.ini b/config/polybar/pwidgets/cpu.ini new file mode 100644 index 0000000..f2a3410 --- /dev/null +++ b/config/polybar/pwidgets/cpu.ini @@ -0,0 +1,394 @@ +;; ┌────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Global WM Settings + +[global/wm] +; Adjust the _NET_WM_STRUT_PARTIAL top value +; Used for top aligned bars +margin-bottom = 0 + +; Adjust the _NET_WM_STRUT_PARTIAL bottom value +; Used for bottom aligned bars +margin-top = 0 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; File Inclusion +; include an external file, like module file, etc. + +include-file = ~/.config/polybar/pwidgets/colors.ini + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Bar Settings + +[bar/main] +; Use either of the following command to list available outputs: +; If unspecified, the application will pick the first one it finds. +; $ polybar -m | cut -d ':' -f 1 +; $ xrandr -q | grep " connected" | cut -d ' ' -f1 +monitor = + +; Use the specified monitor as a fallback if the main one is not found. +monitor-fallback = + +; Require the monitor to be in connected state +; XRandR sometimes reports my monitor as being disconnected (when in use) +monitor-strict = false + +; Tell the Window Manager not to configure the window. +; Use this to detach the bar if your WM is locking its size/position. +override-redirect = false + +; Put the bar at the bottom of the screen +bottom = true + +; Prefer fixed center position for the `modules-center` block +; When false, the center position will be based on the size of the other blocks. +fixed-center = true + +; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in a width or height of 50% minus 10 pixels +width = 230 +height = 60 + +; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in an offset in the x or y direction +; of 50% minus 10 pixels +offset-x = 0 +offset-y = 0 + +; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) +background = ${color.bg} + +; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) +foreground = ${color.fg} + +; Background gradient (vertical steps) +; background-[0-9]+ = #aarrggbb +;;background-0 = + +; Value used for drawing rounded corners +; Note: This shouldn't be used together with border-size because the border +; doesn't get rounded +; Individual top/bottom values can be defined using: +; radius-{top,bottom} +radius-top = 20.0 +radius-bottom = 20.0 + +; Under-/overline pixel size and argb color +; Individual values can be defined using: +; {overline,underline}-size +; {overline,underline}-color +line-size = 2 +line-color = ${color.ac} + +; Values applied to all borders +; Individual side values can be defined using: +; border-{left,top,right,bottom}-size +; border-{left,top,right,bottom}-color +; The top and bottom borders are added to the bar height, so the effective +; window height is: +; height + border-top-size + border-bottom-size +; Meanwhile the effective window width is defined entirely by the width key and +; the border is placed withing this area. So you effectively only have the +; following horizontal space on the bar: +; width - border-right-size - border-left-size +border-bottom-size = 0 +border-color = ${color.ac} + +; Number of spaces to add at the beginning/end of the bar +; Individual side values can be defined using: +; padding-{left,right} +padding = 2 + +; Number of spaces to add before/after each module +; Individual side values can be defined using: +; module-margin-{left,right} +module-margin-left = 1 +module-margin-right = 1 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; Fonts are defined using <font-name>;<vertical-offset> +; Font names are specified using a fontconfig pattern. +; font-0 = NotoSans-Regular:size=8;2 +; font-1 = MaterialIcons:size=10 +; font-2 = Termsynu:size=8;-1 +; font-3 = FontAwesome:size=10 +; See the Fonts wiki page for more details + +font-0 = "Iosevka Nerd Font:size=24;6" +font-1 = "Iosevka Nerd Font:size=12;2" +font-2 = "Iosevka Nerd Font:bold:size=24;2" + +; Modules are added to one of the available blocks +; modules-left = cpu ram +; modules-center = xwindow xbacklight +; modules-right = ipc clock + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[bar/primary] +inherit = bar/main +offset-x = 25 +offset-y = 25 + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-center = cpu_bar +enable-ipc = true + +[bar/secondary] +inherit = bar/main +offset-x = 25 +offset-y = 75 +background = ${color.trans} +foreground = ${color.white} + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-left = name sep cpu +enable-ipc = true + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; The separator will be inserted between the output of each module +separator = + +; Opacity value between 0.0 and 1.0 used on fade in/out +dim-value = 1.0 + +; Value to be used to set the WM_NAME atom +; If the value is empty or undefined, the atom value +; will be created from the following template: polybar-[BAR]_[MONITOR] +; NOTE: The placeholders are not available for custom values +wm-name = + +; Locale used to localize various module data (e.g. date) +; Expects a valid libc locale, for example: sv_SE.UTF-8 +locale = + +; Position of the system tray window +; If empty or undefined, tray support will be disabled +; NOTE: A center aligned tray will cover center aligned modules +; +; Available positions: +; left +; center +; right +; none +tray-position = none + +; If true, the bar will not shift its +; contents when the tray changes +tray-detached = false + +; Tray icon max size +tray-maxsize = 16 + +; Background color for the tray container +; ARGB color (e.g. #f00, #ff992a, #ddff1023) +; By default the tray container will use the bar +; background color. +tray-background = ${color.background} + +; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +tray-offset-x = 0 +tray-offset-y = 0 + +; Pad the sides of each tray icon +tray-padding = 0 + +; Scale factor for tray clients +tray-scale = 1.0 + +; Restack the bar window and put it above the +; selected window manager's root +; +; Fixes the issue where the bar is being drawn +; on top of fullscreen window's +; +; Currently supported WM's: +; bspwm +; i3 (requires: `override-redirect = true`) +;;wm-restack = + +; Set a DPI values used when rendering text +; This only affects scalable fonts +; dpi = + +; Enable support for inter-process messaging +; See the Messaging wiki page for more details. +;enable-ipc = true + +; Fallback click handlers that will be called if +; there's no matching module handler found. +click-left = +click-middle = +click-right = +scroll-up = +scroll-down = +double-click-left = +double-click-middle = +double-click-right = + +; Requires polybar to be built with xcursor support (xcb-util-cursor) +; Possible values are: +; - default : The default pointer as before, can also be an empty string (default) +; - pointer : Typically in the form of a hand +; - ns-resize : Up and down arrows, can be used to indicate scrolling +cursor-click = +cursor-scroll = + +;; WM Workspace Specific + +; bspwm +;;scroll-up = bspwm-desknext +;;scroll-down = bspwm-deskprev +;;scroll-up = bspc desktop -f prev.local +;;scroll-down = bspc desktop -f next.local + +;i3 +;;scroll-up = i3wm-wsnext +;;scroll-down = i3wm-wsprev +;;scroll-up = i3-msg workspace next_on_output +;;scroll-down = i3-msg workspace prev_on_output + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Application Settings + +[settings] +; The throttle settings lets the eventloop swallow up til X events +; if they happen within Y millisecond after first event was received. +; This is done to prevent flood of update event. +; +; For example if 5 modules emit an update event at the same time, we really +; just care about the last one. But if we wait too long for events to swallow +; the bar would appear sluggish so we continue if timeout +; expires or limit is reached. +throttle-output = 5 +throttle-output-for = 10 + +; Time in milliseconds that the input handler will wait between processing events +;throttle-input-for = 30 + +; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events +screenchange-reload = false + +; Compositing operators +; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t +compositing-background = source +compositing-foreground = over +compositing-overline = over +compositing-underline = over +compositing-border = over + +; Define fallback values used by all module formats +;format-foreground = +;format-background = +;format-underline = +;format-overline = +;format-spacing = +;format-padding = +;format-margin = +;format-offset = + +; Enables pseudo-transparency for the bar +; If set to true the bar can be transparent without a compositor. +pseudo-transparency = false + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; ┌────────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/cpu] +type = internal/cpu + +interval = 0.5 +format = <label> +format-foreground = ${color.fg} +format-font = 2 +label = "%percentage-core1%% %percentage-core2%% %percentage-core3%% %percentage-core4%%" + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/cpu_bar] +type = internal/cpu + +interval = 0.5 +format = <bar-load> + +bar-load-width = 10 +bar-load-gradient = false + +bar-load-indicator = +bar-load-indicator-foreground = ${color.ac} +bar-load-indicator-font = 1 + +bar-load-fill = ⏽ +bar-load-foreground-0 = ${color.green} +bar-load-foreground-1 = ${color.green} +bar-load-foreground-2 = ${color.green} +bar-load-foreground-3 = ${color.amber} +bar-load-foreground-4 = ${color.amber} +bar-load-foreground-5 = ${color.amber} +bar-load-foreground-6 = ${color.red} +bar-load-foreground-7 = ${color.red} +bar-load-foreground-8 = ${color.red} +bar-load-fill-font = 1 + +bar-load-empty = ⏽ +bar-load-empty-foreground = ${color.gray} +bar-load-empty-font = 1 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/name] +type = custom/text + +content = cpu +content-foreground = ${color.fg} +content-font = 3 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/sep] +type = custom/text +content = " | " +content-font = 2 + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +[module/sep2] +type = custom/text +content = " " + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/config/polybar/pwidgets/fs.ini b/config/polybar/pwidgets/fs.ini new file mode 100644 index 0000000..64ca823 --- /dev/null +++ b/config/polybar/pwidgets/fs.ini @@ -0,0 +1,411 @@ +;; ┌────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Global WM Settings + +[global/wm] +; Adjust the _NET_WM_STRUT_PARTIAL top value +; Used for top aligned bars +margin-bottom = 0 + +; Adjust the _NET_WM_STRUT_PARTIAL bottom value +; Used for bottom aligned bars +margin-top = 0 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; File Inclusion +; include an external file, like module file, etc. + +include-file = ~/.config/polybar/pwidgets/colors.ini + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Bar Settings + +[bar/main] +; Use either of the following command to list available outputs: +; If unspecified, the application will pick the first one it finds. +; $ polybar -m | cut -d ':' -f 1 +; $ xrandr -q | grep " connected" | cut -d ' ' -f1 +monitor = + +; Use the specified monitor as a fallback if the main one is not found. +monitor-fallback = + +; Require the monitor to be in connected state +; XRandR sometimes reports my monitor as being disconnected (when in use) +monitor-strict = false + +; Tell the Window Manager not to configure the window. +; Use this to detach the bar if your WM is locking its size/position. +override-redirect = false + +; Put the bar at the bottom of the screen +bottom = true + +; Prefer fixed center position for the `modules-center` block +; When false, the center position will be based on the size of the other blocks. +fixed-center = true + +; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in a width or height of 50% minus 10 pixels +width = 230 +height = 60 + +; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in an offset in the x or y direction +; of 50% minus 10 pixels +offset-x = 0 +offset-y = 0 + +; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) +background = ${color.bg} + +; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) +foreground = ${color.fg} + +; Background gradient (vertical steps) +; background-[0-9]+ = #aarrggbb +;;background-0 = + +; Value used for drawing rounded corners +; Note: This shouldn't be used together with border-size because the border +; doesn't get rounded +; Individual top/bottom values can be defined using: +; radius-{top,bottom} +radius-top = 20.0 +radius-bottom = 20.0 + +; Under-/overline pixel size and argb color +; Individual values can be defined using: +; {overline,underline}-size +; {overline,underline}-color +line-size = 2 +line-color = ${color.ac} + +; Values applied to all borders +; Individual side values can be defined using: +; border-{left,top,right,bottom}-size +; border-{left,top,right,bottom}-color +; The top and bottom borders are added to the bar height, so the effective +; window height is: +; height + border-top-size + border-bottom-size +; Meanwhile the effective window width is defined entirely by the width key and +; the border is placed withing this area. So you effectively only have the +; following horizontal space on the bar: +; width - border-right-size - border-left-size +border-bottom-size = 0 +border-color = ${color.ac} + +; Number of spaces to add at the beginning/end of the bar +; Individual side values can be defined using: +; padding-{left,right} +padding = 2 + +; Number of spaces to add before/after each module +; Individual side values can be defined using: +; module-margin-{left,right} +module-margin-left = 1 +module-margin-right = 1 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; Fonts are defined using <font-name>;<vertical-offset> +; Font names are specified using a fontconfig pattern. +; font-0 = NotoSans-Regular:size=8;2 +; font-1 = MaterialIcons:size=10 +; font-2 = Termsynu:size=8;-1 +; font-3 = FontAwesome:size=10 +; See the Fonts wiki page for more details + +font-0 = "Iosevka Nerd Font:size=24;6" +font-1 = "Iosevka Nerd Font:size=12;2" +font-2 = "Iosevka Nerd Font:bold:size=24;2" + +; Modules are added to one of the available blocks +; modules-left = cpu ram +; modules-center = xwindow xbacklight +; modules-right = ipc clock + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[bar/primary] +inherit = bar/main +offset-x = 25 +offset-y = 25 + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-center = fs_bar +enable-ipc = true + +[bar/secondary] +inherit = bar/main +offset-x = 25 +offset-y = 75 +background = ${color.trans} +foreground = ${color.white} + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-left = name sep fs +enable-ipc = true + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; The separator will be inserted between the output of each module +separator = + +; Opacity value between 0.0 and 1.0 used on fade in/out +dim-value = 1.0 + +; Value to be used to set the WM_NAME atom +; If the value is empty or undefined, the atom value +; will be created from the following template: polybar-[BAR]_[MONITOR] +; NOTE: The placeholders are not available for custom values +wm-name = + +; Locale used to localize various module data (e.g. date) +; Expects a valid libc locale, for example: sv_SE.UTF-8 +locale = + +; Position of the system tray window +; If empty or undefined, tray support will be disabled +; NOTE: A center aligned tray will cover center aligned modules +; +; Available positions: +; left +; center +; right +; none +tray-position = none + +; If true, the bar will not shift its +; contents when the tray changes +tray-detached = false + +; Tray icon max size +tray-maxsize = 16 + +; Background color for the tray container +; ARGB color (e.g. #f00, #ff992a, #ddff1023) +; By default the tray container will use the bar +; background color. +tray-background = ${color.background} + +; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +tray-offset-x = 0 +tray-offset-y = 0 + +; Pad the sides of each tray icon +tray-padding = 0 + +; Scale factor for tray clients +tray-scale = 1.0 + +; Restack the bar window and put it above the +; selected window manager's root +; +; Fixes the issue where the bar is being drawn +; on top of fullscreen window's +; +; Currently supported WM's: +; bspwm +; i3 (requires: `override-redirect = true`) +;;wm-restack = + +; Set a DPI values used when rendering text +; This only affects scalable fonts +; dpi = + +; Enable support for inter-process messaging +; See the Messaging wiki page for more details. +;enable-ipc = true + +; Fallback click handlers that will be called if +; there's no matching module handler found. +click-left = +click-middle = +click-right = +scroll-up = +scroll-down = +double-click-left = +double-click-middle = +double-click-right = + +; Requires polybar to be built with xcursor support (xcb-util-cursor) +; Possible values are: +; - default : The default pointer as before, can also be an empty string (default) +; - pointer : Typically in the form of a hand +; - ns-resize : Up and down arrows, can be used to indicate scrolling +cursor-click = +cursor-scroll = + +;; WM Workspace Specific + +; bspwm +;;scroll-up = bspwm-desknext +;;scroll-down = bspwm-deskprev +;;scroll-up = bspc desktop -f prev.local +;;scroll-down = bspc desktop -f next.local + +;i3 +;;scroll-up = i3wm-wsnext +;;scroll-down = i3wm-wsprev +;;scroll-up = i3-msg workspace next_on_output +;;scroll-down = i3-msg workspace prev_on_output + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Application Settings + +[settings] +; The throttle settings lets the eventloop swallow up til X events +; if they happen within Y millisecond after first event was received. +; This is done to prevent flood of update event. +; +; For example if 5 modules emit an update event at the same time, we really +; just care about the last one. But if we wait too long for events to swallow +; the bar would appear sluggish so we continue if timeout +; expires or limit is reached. +throttle-output = 5 +throttle-output-for = 10 + +; Time in milliseconds that the input handler will wait between processing events +;throttle-input-for = 30 + +; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events +screenchange-reload = false + +; Compositing operators +; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t +compositing-background = source +compositing-foreground = over +compositing-overline = over +compositing-underline = over +compositing-border = over + +; Define fallback values used by all module formats +;format-foreground = +;format-background = +;format-underline = +;format-overline = +;format-spacing = +;format-padding = +;format-margin = +;format-offset = + +; Enables pseudo-transparency for the bar +; If set to true the bar can be transparent without a compositor. +pseudo-transparency = false + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; ┌────────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/fs] +type = internal/fs + +mount-0 = / +;;mount-1 = /home + +interval = 10 +fixed-values = true + +; Spacing between entries +; Default: 2 +;;spacing = 4 + +format-mounted = <label-mounted> +format-mounted-foreground = ${color.fg} +format-mounted-font = 2 + +format-unmounted = <label-unmounted> +format-unmounted-foreground = ${color.fg} +format-unmounted-font = 2 + +label-mounted = "%free%" +label-unmounted = Not Mounted + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/fs_bar] +type = internal/fs + +mount-0 = / +;;mount-1 = /home + +format-mounted = <bar-used> + +bar-used-width = 10 +bar-used-gradient = false + +bar-used-indicator = +bar-used-indicator-foreground = ${color.ac} +bar-used-indicator-font = 1 + +bar-used-fill = ⏽ +bar-used-foreground-0 = ${color.green} +bar-used-foreground-1 = ${color.green} +bar-used-foreground-2 = ${color.green} +bar-used-foreground-3 = ${color.green} +bar-used-foreground-4 = ${color.green} +bar-used-foreground-5 = ${color.amber} +bar-used-foreground-6 = ${color.amber} +bar-used-foreground-7 = ${color.red} +bar-used-foreground-8 = ${color.red} +bar-used-fill-font = 1 + +bar-used-empty = ⏽ +bar-used-empty-foreground = ${color.gray} +bar-used-empty-font = 1 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/name] +type = custom/text + +content = fs +content-foreground = ${color.fg} +content-font = 3 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/sep] +type = custom/text +content = " | " +content-font = 2 + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +[module/sep2] +type = custom/text +content = " " + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/config/polybar/pwidgets/launch.sh b/config/polybar/pwidgets/launch.sh new file mode 100755 index 0000000..c5659f7 --- /dev/null +++ b/config/polybar/pwidgets/launch.sh @@ -0,0 +1,68 @@ +#!/usr/bin/env sh + +DIR="$HOME/.config/polybar/pwidgets" + +kill_bar() { + # Terminate already running bar instances + killall -q polybar + + # Wait until the processes have been shut down + while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done +} + +## Main +if [[ "$1" == "--main" ]]; then + kill_bar + polybar -q primary -c $DIR/main.ini & + polybar -q secondary -c $DIR/main.ini & + polybar -q top -c $DIR/main.ini & + +## Apps +elif [[ "$1" == "--apps" ]]; then + kill_bar + polybar -q primary -c $DIR/apps.ini & + polybar -q secondary -c $DIR/apps.ini & + +## System +elif [[ "$1" == "--system" ]]; then + kill_bar + polybar -q primary -c $DIR/system.ini & + polybar -q secondary -c $DIR/system.ini & + +## Mpd +elif [[ "$1" == "--mpd" ]]; then + kill_bar + polybar -q primary -c $DIR/mpd.ini & + polybar -q secondary -c $DIR/mpd.ini & + +## Workspaces +elif [[ "$1" == "--ws" ]]; then + kill_bar + polybar -q primary -c $DIR/workspace.ini & + polybar -q secondary -c $DIR/workspace.ini & + +## CPU +elif [[ "$1" == "--cpu" ]]; then + kill_bar + polybar -q primary -c $DIR/cpu.ini & + polybar -q secondary -c $DIR/cpu.ini & + +## Memory +elif [[ "$1" == "--memory" ]]; then + kill_bar + polybar -q primary -c $DIR/memory.ini & + polybar -q secondary -c $DIR/memory.ini & + +## Filesystem +elif [[ "$1" == "--fs" ]]; then + kill_bar + polybar -q primary -c $DIR/fs.ini & + polybar -q secondary -c $DIR/fs.ini & + +else + cat <<- _EOF_ + No widget specified, Available widgets: + --main --apps --system --mpd + --ws --cpu --memory --fs + _EOF_ +fi diff --git a/config/polybar/pwidgets/main.ini b/config/polybar/pwidgets/main.ini new file mode 100644 index 0000000..d7fe77c --- /dev/null +++ b/config/polybar/pwidgets/main.ini @@ -0,0 +1,535 @@ +;; ┌────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Global WM Settings + +[global/wm] +; Adjust the _NET_WM_STRUT_PARTIAL top value +; Used for top aligned bars +margin-bottom = 0 + +; Adjust the _NET_WM_STRUT_PARTIAL bottom value +; Used for bottom aligned bars +margin-top = 0 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; File Inclusion +; include an external file, like module file, etc. + +include-file = ~/.config/polybar/pwidgets/colors.ini + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Bar Settings + +[bar/main] +; Use either of the following command to list available outputs: +; If unspecified, the application will pick the first one it finds. +; $ polybar -m | cut -d ':' -f 1 +; $ xrandr -q | grep " connected" | cut -d ' ' -f1 +monitor = + +; Use the specified monitor as a fallback if the main one is not found. +monitor-fallback = + +; Require the monitor to be in connected state +; XRandR sometimes reports my monitor as being disconnected (when in use) +monitor-strict = false + +; Tell the Window Manager not to configure the window. +; Use this to detach the bar if your WM is locking its size/position. +override-redirect = false + +; Put the bar at the bottom of the screen +bottom = true + +; Prefer fixed center position for the `modules-center` block +; When false, the center position will be based on the size of the other blocks. +fixed-center = true + +; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in a width or height of 50% minus 10 pixels +width = 230 +height = 60 + +; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in an offset in the x or y direction +; of 50% minus 10 pixels +offset-x = 0 +offset-y = 0 + +; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) +background = ${color.bg} + +; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) +foreground = ${color.fg} + +; Background gradient (vertical steps) +; background-[0-9]+ = #aarrggbb +;;background-0 = + +; Value used for drawing rounded corners +; Note: This shouldn't be used together with border-size because the border +; doesn't get rounded +; Individual top/bottom values can be defined using: +; radius-{top,bottom} +radius-top = 20.0 +radius-bottom = 20.0 + +; Under-/overline pixel size and argb color +; Individual values can be defined using: +; {overline,underline}-size +; {overline,underline}-color +line-size = 2 +line-color = ${color.ac} + +; Values applied to all borders +; Individual side values can be defined using: +; border-{left,top,right,bottom}-size +; border-{left,top,right,bottom}-color +; The top and bottom borders are added to the bar height, so the effective +; window height is: +; height + border-top-size + border-bottom-size +; Meanwhile the effective window width is defined entirely by the width key and +; the border is placed withing this area. So you effectively only have the +; following horizontal space on the bar: +; width - border-right-size - border-left-size +border-bottom-size = 0 +border-color = ${color.ac} + +; Number of spaces to add at the beginning/end of the bar +; Individual side values can be defined using: +; padding-{left,right} +padding = 2 + +; Number of spaces to add before/after each module +; Individual side values can be defined using: +; module-margin-{left,right} +module-margin-left = 1 +module-margin-right = 1 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; Fonts are defined using <font-name>;<vertical-offset> +; Font names are specified using a fontconfig pattern. +; font-0 = NotoSans-Regular:size=8;2 +; font-1 = MaterialIcons:size=10 +; font-2 = Termsynu:size=8;-1 +; font-3 = FontAwesome:size=10 +; See the Fonts wiki page for more details + +font-0 = "Iosevka Nerd Font:size=12;2" +font-1 = "Iosevka Nerd Font:bold:size=24;2" +font-2 = "Iosevka Nerd Font:size=22;6" + +; Modules are added to one of the available blocks +; modules-left = cpu ram +; modules-center = xwindow xbacklight +; modules-right = ipc clock + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[bar/primary] +inherit = bar/main +offset-x = 25 +offset-y = 25 + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-center = web sep2 files sep2 edit sep2 apps +enable-ipc = true + +[bar/secondary] +inherit = bar/main +offset-x = 25 +offset-y = 75 +background = ${color.trans} +foreground = ${color.white} + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-left = date sep mpd +enable-ipc = true + +[bar/top] +inherit = bar/main + +width = 165 +height = 40 + +offset-x = 100%:-190 +offset-y = 25 +bottom = false +font-0 = "Iosevka Nerd Font:size=14;4" + +padding = 1 +module-margin-left = 1 +module-margin-right = 1 + +modules-center = alsa battery network sysmenu +enable-ipc = true + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; The separator will be inserted between the output of each module +separator = + +; Opacity value between 0.0 and 1.0 used on fade in/out +dim-value = 1.0 + +; Value to be used to set the WM_NAME atom +; If the value is empty or undefined, the atom value +; will be created from the following template: polybar-[BAR]_[MONITOR] +; NOTE: The placeholders are not available for custom values +wm-name = + +; Locale used to localize various module data (e.g. date) +; Expects a valid libc locale, for example: sv_SE.UTF-8 +locale = + +; Position of the system tray window +; If empty or undefined, tray support will be disabled +; NOTE: A center aligned tray will cover center aligned modules +; +; Available positions: +; left +; center +; right +; none +tray-position = none + +; If true, the bar will not shift its +; contents when the tray changes +tray-detached = false + +; Tray icon max size +tray-maxsize = 16 + +; Background color for the tray container +; ARGB color (e.g. #f00, #ff992a, #ddff1023) +; By default the tray container will use the bar +; background color. +tray-background = ${color.background} + +; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +tray-offset-x = 0 +tray-offset-y = 0 + +; Pad the sides of each tray icon +tray-padding = 0 + +; Scale factor for tray clients +tray-scale = 1.0 + +; Restack the bar window and put it above the +; selected window manager's root +; +; Fixes the issue where the bar is being drawn +; on top of fullscreen window's +; +; Currently supported WM's: +; bspwm +; i3 (requires: `override-redirect = true`) +;;wm-restack = + +; Set a DPI values used when rendering text +; This only affects scalable fonts +; dpi = + +; Enable support for inter-process messaging +; See the Messaging wiki page for more details. +;enable-ipc = true + +; Fallback click handlers that will be called if +; there's no matching module handler found. +click-left = +click-middle = +click-right = +scroll-up = +scroll-down = +double-click-left = +double-click-middle = +double-click-right = + +; Requires polybar to be built with xcursor support (xcb-util-cursor) +; Possible values are: +; - default : The default pointer as before, can also be an empty string (default) +; - pointer : Typically in the form of a hand +; - ns-resize : Up and down arrows, can be used to indicate scrolling +cursor-click = +cursor-scroll = + +;; WM Workspace Specific + +; bspwm +;;scroll-up = bspwm-desknext +;;scroll-down = bspwm-deskprev +;;scroll-up = bspc desktop -f prev.local +;;scroll-down = bspc desktop -f next.local + +;i3 +;;scroll-up = i3wm-wsnext +;;scroll-down = i3wm-wsprev +;;scroll-up = i3-msg workspace next_on_output +;;scroll-down = i3-msg workspace prev_on_output + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Application Settings + +[settings] +; The throttle settings lets the eventloop swallow up til X events +; if they happen within Y millisecond after first event was received. +; This is done to prevent flood of update event. +; +; For example if 5 modules emit an update event at the same time, we really +; just care about the last one. But if we wait too long for events to swallow +; the bar would appear sluggish so we continue if timeout +; expires or limit is reached. +throttle-output = 5 +throttle-output-for = 10 + +; Time in milliseconds that the input handler will wait between processing events +;throttle-input-for = 30 + +; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events +screenchange-reload = false + +; Compositing operators +; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t +compositing-background = source +compositing-foreground = over +compositing-overline = over +compositing-underline = over +compositing-border = over + +; Define fallback values used by all module formats +;format-foreground = +;format-background = +;format-underline = +;format-overline = +;format-spacing = +;format-padding = +;format-margin = +;format-offset = + +; Enables pseudo-transparency for the bar +; If set to true the bar can be transparent without a compositor. +pseudo-transparency = false + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; ┌────────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/date] +type = internal/date + +interval = 1.0 +time = %k:%M + +format = <label> +format-foreground = ${color.fg} +label = %time% +label-font = 2 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/mpd] +type = internal/mpd + +interval = 2 + +format-online = <label-song> +format-online-foreground = ${color.fg} + +label-song = "%title%" +label-song-maxlen = 12 +label-song-ellipsis = true +label-offline = "Offline" + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Apps + +[module/term] +type = custom/text + +content = "%{T3}%{T-}" +content-foreground = ${color.black} +content-background = ${color.bg} +content-padding = 0 + +click-left = termite & + +[module/web] +type = custom/text + +content = "%{T3}%{T-}" +content-foreground = ${color.orange} +content-background = ${color.bg} +content-padding = 0 + +click-left = firefox & + +[module/files] +type = custom/text + +content = "%{T3}%{T-}" +content-foreground = ${color.blue} +content-background = ${color.bg} +content-padding = 0 + +click-left = thunar & + +[module/edit] +type = custom/text + +content = "%{T3}%{T-}" +content-foreground = ${color.gray} +content-background = ${color.bg} +content-padding = 0 + +click-left = geany & + +[module/apps] +type = custom/text + +content = "%{T3}%{T-}" +content-foreground = ${color.fga} +content-background = ${color.bg} +content-padding = 0 + +click-left = ~/.config/polybar/pwidgets/scripts/launcher.sh & +click-right = ~/.config/polybar/pwidgets/scripts/style-switch.sh & + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/sep] +type = custom/text +content = " | " +content-font = 1 + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +[module/sep2] +type = custom/text +content = " " + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/alsa] +type = internal/alsa + +format-volume = <ramp-volume> +format-muted = <label-muted> +label-muted = 婢 +label-muted-foreground = ${color.gray} + +ramp-volume-0 = 奄 +ramp-volume-1 = 奔 +ramp-volume-2 = 奔 +ramp-volume-3 = 墳 +ramp-volume-4 = 墳 +ramp-volume-foreground = ${color.blue} + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/battery] +type = internal/battery + +full-at = 99 +battery = BAT1 +adapter = ACAD + +poll-interval = 2 +time-format = %H:%M + +format-charging = <animation-charging> +format-discharging = <ramp-capacity> + +format-full = <label-full> +format-full-foreground = ${color.red} + +label-full = + +ramp-capacity-0 = +ramp-capacity-1 = +ramp-capacity-2 = +ramp-capacity-3 = +ramp-capacity-4 = +ramp-capacity-5 = +ramp-capacity-6 = +ramp-capacity-7 = +ramp-capacity-8 = +ramp-capacity-9 = +ramp-capacity-foreground = ${color.orange} + +animation-charging-0 = +animation-charging-1 = +animation-charging-2 = +animation-charging-3 = +animation-charging-4 = +animation-charging-5 = +animation-charging-6 = +animation-charging-7 = +animation-charging-8 = +animation-charging-9 = +animation-charging-foreground = ${color.green} + +animation-charging-framerate = 750 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/network] +type = internal/network +interface = wlan0 + +interval = 1.0 +accumulate-stats = true +unknown-as-up = true + +format-connected = <label-connected> +format-connected-foreground = ${color.purple} +format-disconnected = <label-disconnected> +format-disconnected-foreground = ${color.gray} + +label-connected = "%{A1:networkmanager_dmenu &:}直%{A}" +label-disconnected = "%{A1:networkmanager_dmenu &:}睊%{A}" + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/sysmenu] +type = custom/text +content = 襤 + +content-foreground = ${color.red} +click-left = ~/.config/polybar/pwidgets/scripts/powermenu.sh & +click-right = ~/.config/polybar/pwidgets/scripts/powermenu.sh & + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/config/polybar/pwidgets/memory.ini b/config/polybar/pwidgets/memory.ini new file mode 100644 index 0000000..ae63955 --- /dev/null +++ b/config/polybar/pwidgets/memory.ini @@ -0,0 +1,397 @@ +;; ┌────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Global WM Settings + +[global/wm] +; Adjust the _NET_WM_STRUT_PARTIAL top value +; Used for top aligned bars +margin-bottom = 0 + +; Adjust the _NET_WM_STRUT_PARTIAL bottom value +; Used for bottom aligned bars +margin-top = 0 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; File Inclusion +; include an external file, like module file, etc. + +include-file = ~/.config/polybar/pwidgets/colors.ini + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Bar Settings + +[bar/main] +; Use either of the following command to list available outputs: +; If unspecified, the application will pick the first one it finds. +; $ polybar -m | cut -d ':' -f 1 +; $ xrandr -q | grep " connected" | cut -d ' ' -f1 +monitor = + +; Use the specified monitor as a fallback if the main one is not found. +monitor-fallback = + +; Require the monitor to be in connected state +; XRandR sometimes reports my monitor as being disconnected (when in use) +monitor-strict = false + +; Tell the Window Manager not to configure the window. +; Use this to detach the bar if your WM is locking its size/position. +override-redirect = false + +; Put the bar at the bottom of the screen +bottom = true + +; Prefer fixed center position for the `modules-center` block +; When false, the center position will be based on the size of the other blocks. +fixed-center = true + +; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in a width or height of 50% minus 10 pixels +width = 230 +height = 60 + +; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in an offset in the x or y direction +; of 50% minus 10 pixels +offset-x = 0 +offset-y = 0 + +; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) +background = ${color.bg} + +; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) +foreground = ${color.fg} + +; Background gradient (vertical steps) +; background-[0-9]+ = #aarrggbb +;;background-0 = + +; Value used for drawing rounded corners +; Note: This shouldn't be used together with border-size because the border +; doesn't get rounded +; Individual top/bottom values can be defined using: +; radius-{top,bottom} +radius-top = 20.0 +radius-bottom = 20.0 + +; Under-/overline pixel size and argb color +; Individual values can be defined using: +; {overline,underline}-size +; {overline,underline}-color +line-size = 2 +line-color = ${color.ac} + +; Values applied to all borders +; Individual side values can be defined using: +; border-{left,top,right,bottom}-size +; border-{left,top,right,bottom}-color +; The top and bottom borders are added to the bar height, so the effective +; window height is: +; height + border-top-size + border-bottom-size +; Meanwhile the effective window width is defined entirely by the width key and +; the border is placed withing this area. So you effectively only have the +; following horizontal space on the bar: +; width - border-right-size - border-left-size +border-bottom-size = 0 +border-color = ${color.ac} + +; Number of spaces to add at the beginning/end of the bar +; Individual side values can be defined using: +; padding-{left,right} +padding = 2 + +; Number of spaces to add before/after each module +; Individual side values can be defined using: +; module-margin-{left,right} +module-margin-left = 1 +module-margin-right = 1 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; Fonts are defined using <font-name>;<vertical-offset> +; Font names are specified using a fontconfig pattern. +; font-0 = NotoSans-Regular:size=8;2 +; font-1 = MaterialIcons:size=10 +; font-2 = Termsynu:size=8;-1 +; font-3 = FontAwesome:size=10 +; See the Fonts wiki page for more details + +font-0 = "Iosevka Nerd Font:size=24;6" +font-1 = "Iosevka Nerd Font:size=12;2" +font-2 = "Iosevka Nerd Font:bold:size=24;2" + +; Modules are added to one of the available blocks +; modules-left = cpu ram +; modules-center = xwindow xbacklight +; modules-right = ipc clock + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[bar/primary] +inherit = bar/main +offset-x = 25 +offset-y = 25 + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-center = memory_bar +enable-ipc = true + +[bar/secondary] +inherit = bar/main +offset-x = 25 +offset-y = 75 +background = ${color.trans} +foreground = ${color.white} + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-left = name sep memory +enable-ipc = true + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; The separator will be inserted between the output of each module +separator = + +; Opacity value between 0.0 and 1.0 used on fade in/out +dim-value = 1.0 + +; Value to be used to set the WM_NAME atom +; If the value is empty or undefined, the atom value +; will be created from the following template: polybar-[BAR]_[MONITOR] +; NOTE: The placeholders are not available for custom values +wm-name = + +; Locale used to localize various module data (e.g. date) +; Expects a valid libc locale, for example: sv_SE.UTF-8 +locale = + +; Position of the system tray window +; If empty or undefined, tray support will be disabled +; NOTE: A center aligned tray will cover center aligned modules +; +; Available positions: +; left +; center +; right +; none +tray-position = none + +; If true, the bar will not shift its +; contents when the tray changes +tray-detached = false + +; Tray icon max size +tray-maxsize = 16 + +; Background color for the tray container +; ARGB color (e.g. #f00, #ff992a, #ddff1023) +; By default the tray container will use the bar +; background color. +tray-background = ${color.background} + +; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +tray-offset-x = 0 +tray-offset-y = 0 + +; Pad the sides of each tray icon +tray-padding = 0 + +; Scale factor for tray clients +tray-scale = 1.0 + +; Restack the bar window and put it above the +; selected window manager's root +; +; Fixes the issue where the bar is being drawn +; on top of fullscreen window's +; +; Currently supported WM's: +; bspwm +; i3 (requires: `override-redirect = true`) +;;wm-restack = + +; Set a DPI values used when rendering text +; This only affects scalable fonts +; dpi = + +; Enable support for inter-process messaging +; See the Messaging wiki page for more details. +;enable-ipc = true + +; Fallback click handlers that will be called if +; there's no matching module handler found. +click-left = +click-middle = +click-right = +scroll-up = +scroll-down = +double-click-left = +double-click-middle = +double-click-right = + +; Requires polybar to be built with xcursor support (xcb-util-cursor) +; Possible values are: +; - default : The default pointer as before, can also be an empty string (default) +; - pointer : Typically in the form of a hand +; - ns-resize : Up and down arrows, can be used to indicate scrolling +cursor-click = +cursor-scroll = + +;; WM Workspace Specific + +; bspwm +;;scroll-up = bspwm-desknext +;;scroll-down = bspwm-deskprev +;;scroll-up = bspc desktop -f prev.local +;;scroll-down = bspc desktop -f next.local + +;i3 +;;scroll-up = i3wm-wsnext +;;scroll-down = i3wm-wsprev +;;scroll-up = i3-msg workspace next_on_output +;;scroll-down = i3-msg workspace prev_on_output + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Application Settings + +[settings] +; The throttle settings lets the eventloop swallow up til X events +; if they happen within Y millisecond after first event was received. +; This is done to prevent flood of update event. +; +; For example if 5 modules emit an update event at the same time, we really +; just care about the last one. But if we wait too long for events to swallow +; the bar would appear sluggish so we continue if timeout +; expires or limit is reached. +throttle-output = 5 +throttle-output-for = 10 + +; Time in milliseconds that the input handler will wait between processing events +;throttle-input-for = 30 + +; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events +screenchange-reload = false + +; Compositing operators +; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t +compositing-background = source +compositing-foreground = over +compositing-overline = over +compositing-underline = over +compositing-border = over + +; Define fallback values used by all module formats +;format-foreground = +;format-background = +;format-underline = +;format-overline = +;format-spacing = +;format-padding = +;format-margin = +;format-offset = + +; Enables pseudo-transparency for the bar +; If set to true the bar can be transparent without a compositor. +pseudo-transparency = false + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; ┌────────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/memory] +type = internal/memory + +interval = 3 + +format = <label> +format-foreground = ${color.fg} +format-font = 2 + +label = "%mb_used%" + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/memory_bar] +type = internal/memory + +interval = 2 + +format = <bar-used> + +bar-used-width = 10 +bar-used-gradient = false + +bar-used-indicator = +bar-used-indicator-foreground = ${color.ac} +bar-used-indicator-font = 1 + +bar-used-fill = ⏽ +bar-used-foreground-0 = ${color.green} +bar-used-foreground-1 = ${color.green} +bar-used-foreground-2 = ${color.green} +bar-used-foreground-3 = ${color.amber} +bar-used-foreground-4 = ${color.amber} +bar-used-foreground-5 = ${color.amber} +bar-used-foreground-6 = ${color.red} +bar-used-foreground-7 = ${color.red} +bar-used-foreground-8 = ${color.red} +bar-used-fill-font = 1 + +bar-used-empty = ⏽ +bar-used-empty-foreground = ${color.gray} +bar-used-empty-font = 1 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/name] +type = custom/text + +content = memory +content-foreground = ${color.fg} +content-font = 3 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/sep] +type = custom/text +content = " | " +content-font = 2 + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +[module/sep2] +type = custom/text +content = " " + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/config/polybar/pwidgets/mpd.ini b/config/polybar/pwidgets/mpd.ini new file mode 100644 index 0000000..014bd1d --- /dev/null +++ b/config/polybar/pwidgets/mpd.ini @@ -0,0 +1,397 @@ +;; ┌────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Global WM Settings + +[global/wm] +; Adjust the _NET_WM_STRUT_PARTIAL top value +; Used for top aligned bars +margin-bottom = 0 + +; Adjust the _NET_WM_STRUT_PARTIAL bottom value +; Used for bottom aligned bars +margin-top = 0 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; File Inclusion +; include an external file, like module file, etc. + +include-file = ~/.config/polybar/pwidgets/colors.ini + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Bar Settings + +[bar/main] +; Use either of the following command to list available outputs: +; If unspecified, the application will pick the first one it finds. +; $ polybar -m | cut -d ':' -f 1 +; $ xrandr -q | grep " connected" | cut -d ' ' -f1 +monitor = + +; Use the specified monitor as a fallback if the main one is not found. +monitor-fallback = + +; Require the monitor to be in connected state +; XRandR sometimes reports my monitor as being disconnected (when in use) +monitor-strict = false + +; Tell the Window Manager not to configure the window. +; Use this to detach the bar if your WM is locking its size/position. +override-redirect = false + +; Put the bar at the bottom of the screen +bottom = true + +; Prefer fixed center position for the `modules-center` block +; When false, the center position will be based on the size of the other blocks. +fixed-center = true + +; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in a width or height of 50% minus 10 pixels +width = 230 +height = 60 + +; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in an offset in the x or y direction +; of 50% minus 10 pixels +offset-x = 0 +offset-y = 0 + +; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) +background = ${color.bg} + +; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) +foreground = ${color.fg} + +; Background gradient (vertical steps) +; background-[0-9]+ = #aarrggbb +;;background-0 = + +; Value used for drawing rounded corners +; Note: This shouldn't be used together with border-size because the border +; doesn't get rounded +; Individual top/bottom values can be defined using: +; radius-{top,bottom} +radius-top = 20.0 +radius-bottom = 20.0 + +; Under-/overline pixel size and argb color +; Individual values can be defined using: +; {overline,underline}-size +; {overline,underline}-color +line-size = 2 +line-color = ${color.ac} + +; Values applied to all borders +; Individual side values can be defined using: +; border-{left,top,right,bottom}-size +; border-{left,top,right,bottom}-color +; The top and bottom borders are added to the bar height, so the effective +; window height is: +; height + border-top-size + border-bottom-size +; Meanwhile the effective window width is defined entirely by the width key and +; the border is placed withing this area. So you effectively only have the +; following horizontal space on the bar: +; width - border-right-size - border-left-size +border-bottom-size = 0 +border-color = ${color.ac} + +; Number of spaces to add at the beginning/end of the bar +; Individual side values can be defined using: +; padding-{left,right} +padding = 2 + +; Number of spaces to add before/after each module +; Individual side values can be defined using: +; module-margin-{left,right} +module-margin-left = 1 +module-margin-right = 1 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; Fonts are defined using <font-name>;<vertical-offset> +; Font names are specified using a fontconfig pattern. +; font-0 = NotoSans-Regular:size=8;2 +; font-1 = MaterialIcons:size=10 +; font-2 = Termsynu:size=8;-1 +; font-3 = FontAwesome:size=10 +; See the Fonts wiki page for more details + +font-0 = "Iosevka Nerd Font:size=12;2" +font-1 = "Iosevka Nerd Font:bold:size=24;2" +font-2 = "Iosevka Nerd Font:size=28;8" + +; Modules are added to one of the available blocks +; modules-left = cpu ram +; modules-center = xwindow xbacklight +; modules-right = ipc clock + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[bar/primary] +inherit = bar/main +offset-x = 25 +offset-y = 25 + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-center = buttons +enable-ipc = true + +[bar/secondary] +inherit = bar/main +offset-x = 25 +offset-y = 75 +background = ${color.trans} +foreground = ${color.white} + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-left = player sep mpd +enable-ipc = true + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; The separator will be inserted between the output of each module +separator = + +; Opacity value between 0.0 and 1.0 used on fade in/out +dim-value = 1.0 + +; Value to be used to set the WM_NAME atom +; If the value is empty or undefined, the atom value +; will be created from the following template: polybar-[BAR]_[MONITOR] +; NOTE: The placeholders are not available for custom values +wm-name = + +; Locale used to localize various module data (e.g. date) +; Expects a valid libc locale, for example: sv_SE.UTF-8 +locale = + +; Position of the system tray window +; If empty or undefined, tray support will be disabled +; NOTE: A center aligned tray will cover center aligned modules +; +; Available positions: +; left +; center +; right +; none +tray-position = none + +; If true, the bar will not shift its +; contents when the tray changes +tray-detached = false + +; Tray icon max size +tray-maxsize = 16 + +; Background color for the tray container +; ARGB color (e.g. #f00, #ff992a, #ddff1023) +; By default the tray container will use the bar +; background color. +tray-background = ${color.background} + +; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +tray-offset-x = 0 +tray-offset-y = 0 + +; Pad the sides of each tray icon +tray-padding = 0 + +; Scale factor for tray clients +tray-scale = 1.0 + +; Restack the bar window and put it above the +; selected window manager's root +; +; Fixes the issue where the bar is being drawn +; on top of fullscreen window's +; +; Currently supported WM's: +; bspwm +; i3 (requires: `override-redirect = true`) +;;wm-restack = + +; Set a DPI values used when rendering text +; This only affects scalable fonts +; dpi = + +; Enable support for inter-process messaging +; See the Messaging wiki page for more details. +;enable-ipc = true + +; Fallback click handlers that will be called if +; there's no matching module handler found. +click-left = +click-middle = +click-right = +scroll-up = +scroll-down = +double-click-left = +double-click-middle = +double-click-right = + +; Requires polybar to be built with xcursor support (xcb-util-cursor) +; Possible values are: +; - default : The default pointer as before, can also be an empty string (default) +; - pointer : Typically in the form of a hand +; - ns-resize : Up and down arrows, can be used to indicate scrolling +cursor-click = +cursor-scroll = + +;; WM Workspace Specific + +; bspwm +;;scroll-up = bspwm-desknext +;;scroll-down = bspwm-deskprev +;;scroll-up = bspc desktop -f prev.local +;;scroll-down = bspc desktop -f next.local + +;i3 +;;scroll-up = i3wm-wsnext +;;scroll-down = i3wm-wsprev +;;scroll-up = i3-msg workspace next_on_output +;;scroll-down = i3-msg workspace prev_on_output + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Application Settings + +[settings] +; The throttle settings lets the eventloop swallow up til X events +; if they happen within Y millisecond after first event was received. +; This is done to prevent flood of update event. +; +; For example if 5 modules emit an update event at the same time, we really +; just care about the last one. But if we wait too long for events to swallow +; the bar would appear sluggish so we continue if timeout +; expires or limit is reached. +throttle-output = 5 +throttle-output-for = 10 + +; Time in milliseconds that the input handler will wait between processing events +;throttle-input-for = 30 + +; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events +screenchange-reload = false + +; Compositing operators +; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t +compositing-background = source +compositing-foreground = over +compositing-overline = over +compositing-underline = over +compositing-border = over + +; Define fallback values used by all module formats +;format-foreground = +;format-background = +;format-underline = +;format-overline = +;format-spacing = +;format-padding = +;format-margin = +;format-offset = + +; Enables pseudo-transparency for the bar +; If set to true the bar can be transparent without a compositor. +pseudo-transparency = false + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; ┌────────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/mpd] +type = internal/mpd + +interval = 2 +format-online = <label-song> +format-online-foreground = ${color.fg} + +label-song = "%title%" +label-song-maxlen = 12 +label-song-ellipsis = true + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/buttons] +type = internal/mpd + +interval = 2 + +format-online = <icon-prev> <toggle> <icon-stop> <icon-next> +format-online-font = 3 + +format-offline = <label-offline> +label-offline = "Offline" + +; Only applies if <icon-X> is used +icon-play-foreground = ${color.blue} +icon-play = 喇 +icon-pause-foreground = ${color.green} +icon-pause = +icon-stop-foreground = ${color.red} +icon-stop = ﭥ +icon-prev-foreground = ${color.teal} +icon-prev = ﭢ +icon-next-foreground = ${color.teal} +icon-next = ﭠ + +icon-seekb = 寧 +icon-seekf = 嶺 +icon-random = 🔀 +icon-repeat = 🔁 +icon-repeatone = 🔂 +icon-single = 🔂 +icon-consume = ✀ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/player] +type = custom/text + +content = mpd +content-foreground = ${color.fg} +content-font = 2 +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/sep] +type = custom/text +content = " | " +content-font = 1 + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +[module/sep2] +type = custom/text +content = " " + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/config/polybar/pwidgets/scripts/launcher.sh b/config/polybar/pwidgets/scripts/launcher.sh new file mode 100755 index 0000000..9fa927a --- /dev/null +++ b/config/polybar/pwidgets/scripts/launcher.sh @@ -0,0 +1,3 @@ +#!/usr/bin/env bash + +rofi -no-config -no-lazy-grab -show drun -modi drun -theme ~/.config/polybar/pwidgets/scripts/rofi/launcher.rasi diff --git a/config/polybar/pwidgets/scripts/powermenu.sh b/config/polybar/pwidgets/scripts/powermenu.sh new file mode 100755 index 0000000..a23ffdb --- /dev/null +++ b/config/polybar/pwidgets/scripts/powermenu.sh @@ -0,0 +1,95 @@ +#!/usr/bin/env bash + +## Author : Aditya Shakya +## Mail : adi1090x@gmail.com +## Github : @adi1090x +## Twitter : @adi1090x + +dir="~/.config/polybar/pwidgets/scripts/rofi" +uptime=$(uptime -p | sed -e 's/up //g') + +rofi_command="rofi -no-config -theme $dir/powermenu.rasi" + +# Options +shutdown=" Shutdown" +reboot=" Restart" +lock=" Lock" +suspend=" Sleep" +logout=" Logout" + +# Confirmation +confirm_exit() { + rofi -dmenu\ + -no-config\ + -i\ + -no-fixed-num-lines\ + -p "Are You Sure? : "\ + -theme $dir/confirm.rasi +} + +# Message +msg() { + rofi -no-config -theme "$dir/message.rasi" -e "Options : yes / y / no / n" +} + +# Variable passed to rofi +options="$lock\n$suspend\n$logout\n$reboot\n$shutdown" + +chosen="$(echo -e "$options" | $rofi_command -p "Uptime: $uptime" -dmenu -selected-row 0)" +case $chosen in + $shutdown) + ans=$(confirm_exit &) + if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then + systemctl poweroff + elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then + exit 0 + else + msg + fi + ;; + $reboot) + ans=$(confirm_exit &) + if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then + systemctl reboot + elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then + exit 0 + else + msg + fi + ;; + $lock) + if [[ -f /usr/bin/i3lock ]]; then + i3lock + elif [[ -f /usr/bin/betterlockscreen ]]; then + betterlockscreen -l + fi + ;; + $suspend) + ans=$(confirm_exit &) + if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then + mpc -q pause + amixer set Master mute + systemctl suspend + elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then + exit 0 + else + msg + fi + ;; + $logout) + ans=$(confirm_exit &) + if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then + if [[ "$DESKTOP_SESSION" == "Openbox" ]]; then + openbox --exit + elif [[ "$DESKTOP_SESSION" == "bspwm" ]]; then + bspc quit + elif [[ "$DESKTOP_SESSION" == "i3" ]]; then + i3-msg exit + fi + elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then + exit 0 + else + msg + fi + ;; +esac diff --git a/config/polybar/pwidgets/scripts/pywal.sh b/config/polybar/pwidgets/scripts/pywal.sh new file mode 100755 index 0000000..7fba92a --- /dev/null +++ b/config/polybar/pwidgets/scripts/pywal.sh @@ -0,0 +1,59 @@ +#!/usr/bin/env bash + +# Color files +PFILE="$HOME/.config/polybar/pwidgets/colors.ini" +RFILE="$HOME/.config/polybar/pwidgets/scripts/rofi/colors.rasi" +WFILE="$HOME/.cache/wal/colors.sh" + +# Get colors +pywal_get() { + wal -i "$1" -q -t +} + +# Change colors +change_color() { + # polybar + sed -i -e "s/bg = #.*/bg = ${BG}/g" $PFILE + sed -i -e "s/fg = #.*/fg = ${FG}/g" $PFILE + sed -i -e "s/fga = #.*/fga = ${RFG}/g" $PFILE + sed -i -e "s/ac = #.*/ac = ${AC}/g" $PFILE + + # rofi + cat > $RFILE <<- EOF + /* colors */ + + * { + al: #00000000; + bg: ${BG}FF; + fg: ${RFG}FF; + ac: ${AC}FF; + } + EOF +} + +# Main +if [[ -x "`which wal`" ]]; then + if [[ "$1" ]]; then + pywal_get "$1" + + # Source the pywal color file + if [[ -e "$WFILE" ]]; then + . "$WFILE" + else + echo 'Color file does not exist, exiting...' + exit 1 + fi + + BG=`printf "%s\n" "$background"` + FG=`printf "%s\n" "$foreground"` + RFG=`printf "%s\n" "$color8"` + AC=`printf "%s\n" "$color1"` + + change_color + else + echo -e "[!] Please enter the path to wallpaper. \n" + echo "Usage : ./pywal.sh path/to/image" + fi +else + echo "[!] 'pywal' is not installed." +fi diff --git a/config/polybar/pwidgets/scripts/random.sh b/config/polybar/pwidgets/scripts/random.sh new file mode 100755 index 0000000..e6aa94a --- /dev/null +++ b/config/polybar/pwidgets/scripts/random.sh @@ -0,0 +1,67 @@ +#!/usr/bin/env bash + +# Color files +PFILE="$HOME/.config/polybar/pwidgets/colors.ini" +RFILE="$HOME/.config/polybar/pwidgets/scripts/rofi/colors.rasi" + +# Change colors +change_color() { + # polybar + sed -i -e "s/bg = #.*/bg = ${BG}/g" $PFILE + sed -i -e "s/fg = #.*/fg = ${BG}/g" $PFILE + sed -i -e "s/fga = #.*/fga = ${RFG}/g" $PFILE + sed -i -e "s/ac = #.*/ac = ${AC}/g" $PFILE + + # rofi + cat > $RFILE <<- EOF + /* colors */ + + * { + al: #00000000; + bg: ${BG}FF; + fg: ${RFG}FF; + ac: ${AC}FF; + } + EOF + + polybar-msg cmd restart +} + +get_random_number() { + RNUM=$(( ($RANDOM % $1) + 1 )) +} + +get_random_color() { + RCOLOR="#" + for i in 1 2 3 4 5 6 + do + get_random_number "16" + case $RNUM in + "1") NEXTDIGIT="1";; + "2") NEXTDIGIT="2";; + "3") NEXTDIGIT="3";; + "4") NEXTDIGIT="4";; + "5") NEXTDIGIT="5";; + "6") NEXTDIGIT="6";; + "7") NEXTDIGIT="7";; + "8") NEXTDIGIT="8";; + "9") NEXTDIGIT="9";; + "10") NEXTDIGIT="A";; + "11") NEXTDIGIT="B";; + "12") NEXTDIGIT="C";; + "13") NEXTDIGIT="D";; + "14") NEXTDIGIT="E";; + "15") NEXTDIGIT="F";; + "16") NEXTDIGIT="0";; + esac + RCOLOR="$RCOLOR$NEXTDIGIT" + done + echo $RCOLOR +} + +# Main +BG=`get_random_color` +RFG=`get_random_color` +AC=`get_random_color` + +change_color diff --git a/config/polybar/pwidgets/scripts/rofi/colors.rasi b/config/polybar/pwidgets/scripts/rofi/colors.rasi new file mode 100644 index 0000000..e951f6a --- /dev/null +++ b/config/polybar/pwidgets/scripts/rofi/colors.rasi @@ -0,0 +1,8 @@ +/* colors */ + +* { + al: #00000000; + bg: #FFFFFFFF; + fg: #454545FF; + ac: #1565C0FF; +} diff --git a/config/polybar/pwidgets/scripts/rofi/confirm.rasi b/config/polybar/pwidgets/scripts/rofi/confirm.rasi new file mode 100644 index 0000000..3d28bcd --- /dev/null +++ b/config/polybar/pwidgets/scripts/rofi/confirm.rasi @@ -0,0 +1,25 @@ +/* Confirm Dialog */ + +@import "colors.rasi" + +* { + background-color: @bg; + text-color: @fg; + font: "Iosevka Nerd Font 10"; +} + +window { + width: 230px; + padding: 20px; + border: 0px; + border-radius: 20px; + border-color: @ac; + location: southwest; + x-offset: 25px; + y-offset: -95px; +} + +entry { + expand: true; + text-color: @ac; +} diff --git a/config/polybar/pwidgets/scripts/rofi/launcher.rasi b/config/polybar/pwidgets/scripts/rofi/launcher.rasi new file mode 100644 index 0000000..d605adf --- /dev/null +++ b/config/polybar/pwidgets/scripts/rofi/launcher.rasi @@ -0,0 +1,119 @@ +/* + * + * Author : Aditya Shakya + * Mail : adi1090x@gmail.com + * Github : @adi1090x + * Twitter : @adi1090x + * + */ + +configuration { + font: "Iosevka Nerd Font 10"; + show-icons: true; + icon-theme: "Papirus"; + display-drun: ""; + drun-display-format: "{name}"; + disable-history: false; + fullscreen: false; + hide-scrollbar: true; + sidebar-mode: false; +} + +@import "colors.rasi" + +window { + transparency: "real"; + background-color: @bg; + text-color: @fg; + border: 0px; + border-color: @ac; + border-radius: 20px; + width: 460px; + location: southwest; + x-offset: 25px; + y-offset: -95px; +} + +prompt { + enabled: true; + padding: 10px; + background-color: @al; + text-color: @ac; + font: "Iosevka Nerd Font 10"; +} + +entry { + background-color: @al; + text-color: @ac; + placeholder-color: @ac; + expand: true; + horizontal-align: 0; + placeholder: "Search..."; + padding: 10px 10px 10px 0px; + border-radius: 0px; + blink: true; +} + +inputbar { + children: [ prompt, entry ]; + background-color: @al; + text-color: @fg; + expand: false; + border: 0px 0px 1px 0px; + border-radius: 12px; + border-color: @ac; + spacing: 0px; +} + +listview { + background-color: @al; + padding: 0px; + columns: 1; + lines: 8; + spacing: 5px; + cycle: true; + dynamic: true; + layout: vertical; +} + +mainbox { + background-color: @al; + border: 0px; + border-radius: 0px; + border-color: @ac; + children: [ inputbar, listview ]; + spacing: 10px; + padding: 2px 10px 10px 10px; +} + +element { + background-color: @al; + text-color: @fg; + orientation: horizontal; + border-radius: 0px; + padding: 8px; +} + +element-icon { + background-color: transparent; + text-color: inherit; + size: 24px; + border: 0px; +} + +element-text { + background-color: transparent; + text-color: inherit; + expand: true; + horizontal-align: 0; + vertical-align: 0.5; + margin: 0px 2.5px 0px 2.5px; +} + +element selected { + background-color: @ac; + text-color: @bg; + border: 0px 0px 0px 0px; + border-radius: 12px; + border-color: @ac; +} diff --git a/config/polybar/pwidgets/scripts/rofi/message.rasi b/config/polybar/pwidgets/scripts/rofi/message.rasi new file mode 100644 index 0000000..3d28bcd --- /dev/null +++ b/config/polybar/pwidgets/scripts/rofi/message.rasi @@ -0,0 +1,25 @@ +/* Confirm Dialog */ + +@import "colors.rasi" + +* { + background-color: @bg; + text-color: @fg; + font: "Iosevka Nerd Font 10"; +} + +window { + width: 230px; + padding: 20px; + border: 0px; + border-radius: 20px; + border-color: @ac; + location: southwest; + x-offset: 25px; + y-offset: -95px; +} + +entry { + expand: true; + text-color: @ac; +} diff --git a/config/polybar/pwidgets/scripts/rofi/networkmenu.rasi b/config/polybar/pwidgets/scripts/rofi/networkmenu.rasi new file mode 100644 index 0000000..910294d --- /dev/null +++ b/config/polybar/pwidgets/scripts/rofi/networkmenu.rasi @@ -0,0 +1,127 @@ +/* + * + * Author : Aditya Shakya + * Mail : adi1090x@gmail.com + * Github : @adi1090x + * Twitter : @adi1090x + * + */ + +configuration { + font: "Iosevka Nerd Font 10"; + show-icons: true; + icon-theme: "Papirus"; + display-drun: ""; + drun-display-format: "{name}"; + disable-history: false; + fullscreen: false; + hide-scrollbar: true; + sidebar-mode: false; +} + +@import "colors.rasi" + +window { + transparency: "real"; + background-color: @bg; + text-color: @fg; + border: 0px; + border-color: @ac; + border-radius: 20px; + width: 460px; + location: southwest; + x-offset: 25px; + y-offset: -95px; +} + +prompt { + enabled: true; + padding: 10px; + background-color: @al; + text-color: @fg; +} + +textbox-prompt-colon { + padding: 10px 5px 10px 15px; + font: "Iosevka Nerd Font 10"; + background-color: @al; + text-color: @ac; + expand: false; + str: "直"; +} + +entry { + background-color: @al; + text-color: @ac; + placeholder-color: @ac; + expand: true; + horizontal-align: 0; + placeholder: "Search..."; + padding: 10px 10px 10px 0px; + border-radius: 0px; + blink: true; +} + +inputbar { + children: [ textbox-prompt-colon, prompt ]; + background-color: @al; + text-color: @fg; + expand: false; + border: 0px 0px 1px 0px; + border-radius: 12px; + border-color: @ac; + spacing: 0px; +} + +listview { + background-color: @al; + padding: 0px; + columns: 1; + lines: 8; + spacing: 5px; + cycle: true; + dynamic: true; + layout: vertical; +} + +mainbox { + background-color: @al; + border: 0px; + border-radius: 0px; + border-color: @ac; + children: [ inputbar, listview ]; + spacing: 10px; + padding: 2px 10px 10px 10px; +} + +element { + background-color: @al; + text-color: @fg; + orientation: horizontal; + border-radius: 0px; + padding: 8px 8px 8px -10px; +} + +element-icon { + background-color: transparent; + text-color: inherit; + size: 24px; + border: 0px; +} + +element-text { + background-color: transparent; + text-color: inherit; + expand: true; + horizontal-align: 0; + vertical-align: 0.5; + margin: 0px 2.5px 0px 2.5px; +} + +element selected { + background-color: @ac; + text-color: @bg; + border: 0px 0px 0px 0px; + border-radius: 12px; + border-color: @ac; +} diff --git a/config/polybar/pwidgets/scripts/rofi/powermenu.rasi b/config/polybar/pwidgets/scripts/rofi/powermenu.rasi new file mode 100644 index 0000000..c5ec2c4 --- /dev/null +++ b/config/polybar/pwidgets/scripts/rofi/powermenu.rasi @@ -0,0 +1,127 @@ +/* + * + * Author : Aditya Shakya + * Mail : adi1090x@gmail.com + * Github : @adi1090x + * Twitter : @adi1090x + * + */ + +configuration { + font: "Iosevka Nerd Font 10"; + show-icons: true; + icon-theme: "Papirus"; + display-drun: ""; + drun-display-format: "{name}"; + disable-history: false; + fullscreen: false; + hide-scrollbar: true; + sidebar-mode: false; +} + +@import "colors.rasi" + +window { + transparency: "real"; + background-color: @bg; + text-color: @fg; + border: 0px; + border-color: @ac; + border-radius: 20px; + width: 460px; + location: southwest; + x-offset: 25px; + y-offset: -95px; +} + +prompt { + enabled: true; + padding: 10px; + background-color: @al; + text-color: @fg; +} + +textbox-prompt-colon { + padding: 10px 5px 10px 15px; + font: "Iosevka Nerd Font 10"; + background-color: @al; + text-color: @ac; + expand: false; + str: ""; +} + +entry { + background-color: @al; + text-color: @ac; + placeholder-color: @ac; + expand: true; + horizontal-align: 0; + placeholder: "Search..."; + padding: 10px 10px 10px 0px; + border-radius: 0px; + blink: true; +} + +inputbar { + children: [ textbox-prompt-colon, prompt ]; + background-color: @al; + text-color: @fg; + expand: false; + border: 0px 0px 1px 0px; + border-radius: 12px; + border-color: @ac; + spacing: 0px; +} + +listview { + background-color: @al; + padding: 0px; + columns: 1; + lines: 5; + spacing: 5px; + cycle: true; + dynamic: true; + layout: vertical; +} + +mainbox { + background-color: @al; + border: 0px; + border-radius: 0px; + border-color: @ac; + children: [ inputbar, listview ]; + spacing: 10px; + padding: 2px 10px 10px 10px; +} + +element { + background-color: @al; + text-color: @fg; + orientation: horizontal; + border-radius: 0px; + padding: 8px 8px 8px -16px; +} + +element-icon { + background-color: transparent; + text-color: inherit; + size: 24px; + border: 0px; +} + +element-text { + background-color: transparent; + text-color: inherit; + expand: true; + horizontal-align: 0; + vertical-align: 0.5; + margin: 0px 2.5px 0px 2.5px; +} + +element selected { + background-color: @ac; + text-color: @bg; + border: 0px 0px 0px 0px; + border-radius: 12px; + border-color: @ac; +} diff --git a/config/polybar/pwidgets/scripts/rofi/styles.rasi b/config/polybar/pwidgets/scripts/rofi/styles.rasi new file mode 100644 index 0000000..be4b305 --- /dev/null +++ b/config/polybar/pwidgets/scripts/rofi/styles.rasi @@ -0,0 +1,127 @@ +/* + * + * Author : Aditya Shakya + * Mail : adi1090x@gmail.com + * Github : @adi1090x + * Twitter : @adi1090x + * + */ + +configuration { + font: "Iosevka Nerd Font 10"; + show-icons: true; + icon-theme: "Papirus"; + display-drun: ""; + drun-display-format: "{name}"; + disable-history: false; + fullscreen: false; + hide-scrollbar: true; + sidebar-mode: false; +} + +@import "colors.rasi" + +window { + transparency: "real"; + background-color: @bg; + text-color: @fg; + border: 0px; + border-color: @ac; + border-radius: 20px; + width: 460px; + location: southwest; + x-offset: 25px; + y-offset: -95px; +} + +prompt { + enabled: true; + padding: 10px; + background-color: @al; + text-color: @fg; +} + +textbox-prompt-colon { + padding: 10px 10px 10px 15px; + font: "Iosevka Nerd Font 10"; + background-color: @al; + text-color: @ac; + expand: false; + str: ""; +} + +entry { + background-color: @al; + text-color: @ac; + placeholder-color: @ac; + expand: true; + horizontal-align: 0; + placeholder: "Search..."; + padding: 10px 10px 10px 0px; + border-radius: 0px; + blink: true; +} + +inputbar { + children: [ textbox-prompt-colon, entry ]; + background-color: @al; + text-color: @fg; + expand: false; + border: 0px 0px 1px 0px; + border-radius: 12px; + border-color: @ac; + spacing: 0px; +} + +listview { + background-color: @al; + padding: 0px; + columns: 1; + lines: 5; + spacing: 5px; + cycle: true; + dynamic: true; + layout: vertical; +} + +mainbox { + background-color: @al; + border: 0px; + border-radius: 0px; + border-color: @ac; + children: [ inputbar, listview ]; + spacing: 10px; + padding: 2px 10px 10px 10px; +} + +element { + background-color: @al; + text-color: @fg; + orientation: horizontal; + border-radius: 0px; + padding: 8px 8px 8px -16px; +} + +element-icon { + background-color: transparent; + text-color: inherit; + size: 24px; + border: 0px; +} + +element-text { + background-color: transparent; + text-color: inherit; + expand: true; + horizontal-align: 0; + vertical-align: 0.5; + margin: 0px 2.5px 0px 2.5px; +} + +element selected { + background-color: @ac; + text-color: @bg; + border: 0px 0px 0px 0px; + border-radius: 12px; + border-color: @ac; +} diff --git a/config/polybar/pwidgets/scripts/style-switch.sh b/config/polybar/pwidgets/scripts/style-switch.sh new file mode 100755 index 0000000..5f87642 --- /dev/null +++ b/config/polybar/pwidgets/scripts/style-switch.sh @@ -0,0 +1,17 @@ +#!/usr/bin/env bash + +SDIR="$HOME/.config/polybar/pwidgets/scripts" + +# Launch Rofi +MENU="$(rofi -no-config -no-lazy-grab -sep "|" -dmenu -i -p '' \ +-theme $SDIR/rofi/styles.rasi \ +<<< " Default| Nord| Gruvbox| Dark| Cherry| White| Black|")" + case "$MENU" in + *Default) "$SDIR"/styles.sh --default ;; + *Nord) "$SDIR"/styles.sh --nord ;; + *Gruvbox) "$SDIR"/styles.sh --gruvbox ;; + *Dark) "$SDIR"/styles.sh --dark ;; + *Cherry) "$SDIR"/styles.sh --cherry ;; + *White) "$SDIR"/styles.sh --white ;; + *Black) "$SDIR"/styles.sh --black ;; + esac diff --git a/config/polybar/pwidgets/scripts/styles.sh b/config/polybar/pwidgets/scripts/styles.sh new file mode 100755 index 0000000..3cb0d0d --- /dev/null +++ b/config/polybar/pwidgets/scripts/styles.sh @@ -0,0 +1,78 @@ +#!/usr/bin/env bash + +# Color files +PFILE="$HOME/.config/polybar/pwidgets/colors.ini" +RFILE="$HOME/.config/polybar/pwidgets/scripts/rofi/colors.rasi" + +# Change colors +change_color() { + # polybar + sed -i -e "s/bg = #.*/bg = #FF${BG}/g" $PFILE + sed -i -e "s/fg = #.*/fg = #FF${FG}/g" $PFILE + sed -i -e "s/fga = #.*/fga = #FF${RFG}/g" $PFILE + sed -i -e "s/ac = #.*/ac = #FF${AC}/g" $PFILE + + # rofi + cat > $RFILE <<- EOF + /* colors */ + + * { + al: #00000000; + bg: #${BG}FF; + fg: #${RFG}FF; + ac: #${AC}FF; + } + EOF + + polybar-msg cmd restart +} + +if [[ $1 = "--default" ]]; then + BG="212B30" + FG="C4C7C5" + RFG="C4C7C5" + AC="51B4FF" + change_color +elif [[ $1 = "--nord" ]]; then + BG="3B4252" + FG="E5E9F0" + RFG="E5E9F0" + AC="A3BE8C" + change_color +elif [[ $1 = "--gruvbox" ]]; then + BG="282828" + FG="EBDBB2" + RFG="EBDBB2" + AC="FB4934" + change_color +elif [[ $1 = "--dark" ]]; then + BG="141C21" + FG="f5f5f5" + RFG="f5f5f5" + AC="FFE744" + change_color +elif [[ $1 = "--cherry" ]]; then + BG="1F1626" + FG="FFFFFF" + RFG="FFFFFF" + AC="D94084" + change_color +elif [[ $1 = "--white" ]]; then + BG="FFFFFF" + FG="FFFFFF" + RFG="454545" + AC="1565C0" + change_color +elif [[ $1 = "--black" ]]; then + BG="0a0a0a" + FG="0a0a0a" + RFG="a0a0a0" + AC="40D8EB" + change_color +else + cat <<- _EOF_ + No option specified, Available options: + --default --nord --gruvbox --dark --cherry + --white --black + _EOF_ +fi diff --git a/config/polybar/pwidgets/system.ini b/config/polybar/pwidgets/system.ini new file mode 100644 index 0000000..2f1d98a --- /dev/null +++ b/config/polybar/pwidgets/system.ini @@ -0,0 +1,474 @@ +;; ┌────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Global WM Settings + +[global/wm] +; Adjust the _NET_WM_STRUT_PARTIAL top value +; Used for top aligned bars +margin-bottom = 0 + +; Adjust the _NET_WM_STRUT_PARTIAL bottom value +; Used for bottom aligned bars +margin-top = 0 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; File Inclusion +; include an external file, like module file, etc. + +include-file = ~/.config/polybar/pwidgets/colors.ini + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Bar Settings + +[bar/main] +; Use either of the following command to list available outputs: +; If unspecified, the application will pick the first one it finds. +; $ polybar -m | cut -d ':' -f 1 +; $ xrandr -q | grep " connected" | cut -d ' ' -f1 +monitor = + +; Use the specified monitor as a fallback if the main one is not found. +monitor-fallback = + +; Require the monitor to be in connected state +; XRandR sometimes reports my monitor as being disconnected (when in use) +monitor-strict = false + +; Tell the Window Manager not to configure the window. +; Use this to detach the bar if your WM is locking its size/position. +override-redirect = false + +; Put the bar at the bottom of the screen +bottom = true + +; Prefer fixed center position for the `modules-center` block +; When false, the center position will be based on the size of the other blocks. +fixed-center = true + +; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in a width or height of 50% minus 10 pixels +width = 230 +height = 60 + +; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in an offset in the x or y direction +; of 50% minus 10 pixels +offset-x = 0 +offset-y = 0 + +; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) +background = ${color.bg} + +; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) +foreground = ${color.fg} + +; Background gradient (vertical steps) +; background-[0-9]+ = #aarrggbb +;;background-0 = + +; Value used for drawing rounded corners +; Note: This shouldn't be used together with border-size because the border +; doesn't get rounded +; Individual top/bottom values can be defined using: +; radius-{top,bottom} +radius-top = 20.0 +radius-bottom = 20.0 + +; Under-/overline pixel size and argb color +; Individual values can be defined using: +; {overline,underline}-size +; {overline,underline}-color +line-size = 2 +line-color = ${color.ac} + +; Values applied to all borders +; Individual side values can be defined using: +; border-{left,top,right,bottom}-size +; border-{left,top,right,bottom}-color +; The top and bottom borders are added to the bar height, so the effective +; window height is: +; height + border-top-size + border-bottom-size +; Meanwhile the effective window width is defined entirely by the width key and +; the border is placed withing this area. So you effectively only have the +; following horizontal space on the bar: +; width - border-right-size - border-left-size +border-bottom-size = 0 +border-color = ${color.ac} + +; Number of spaces to add at the beginning/end of the bar +; Individual side values can be defined using: +; padding-{left,right} +padding = 2 + +; Number of spaces to add before/after each module +; Individual side values can be defined using: +; module-margin-{left,right} +module-margin-left = 1 +module-margin-right = 1 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; Fonts are defined using <font-name>;<vertical-offset> +; Font names are specified using a fontconfig pattern. +; font-0 = NotoSans-Regular:size=8;2 +; font-1 = MaterialIcons:size=10 +; font-2 = Termsynu:size=8;-1 +; font-3 = FontAwesome:size=10 +; See the Fonts wiki page for more details + +font-0 = "Iosevka Nerd Font:size=20;5" +font-1 = "Iosevka Nerd Font:bold:size=24;2" +font-2 = "Iosevka Nerd Font:size=12;2" + +; Modules are added to one of the available blocks +; modules-left = cpu ram +; modules-center = xwindow xbacklight +; modules-right = ipc clock + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[bar/primary] +inherit = bar/main +offset-x = 25 +offset-y = 25 + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-center = alsa sep2 battery sep2 network sep2 sysmenu +enable-ipc = true + +[bar/secondary] +inherit = bar/main +offset-x = 25 +offset-y = 75 +background = ${color.trans} +foreground = ${color.white} + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-left = ssid sep speed +enable-ipc = true + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; The separator will be inserted between the output of each module +separator = + +; Opacity value between 0.0 and 1.0 used on fade in/out +dim-value = 1.0 + +; Value to be used to set the WM_NAME atom +; If the value is empty or undefined, the atom value +; will be created from the following template: polybar-[BAR]_[MONITOR] +; NOTE: The placeholders are not available for custom values +wm-name = + +; Locale used to localize various module data (e.g. date) +; Expects a valid libc locale, for example: sv_SE.UTF-8 +locale = + +; Position of the system tray window +; If empty or undefined, tray support will be disabled +; NOTE: A center aligned tray will cover center aligned modules +; +; Available positions: +; left +; center +; right +; none +tray-position = none + +; If true, the bar will not shift its +; contents when the tray changes +tray-detached = false + +; Tray icon max size +tray-maxsize = 16 + +; Background color for the tray container +; ARGB color (e.g. #f00, #ff992a, #ddff1023) +; By default the tray container will use the bar +; background color. +tray-background = ${color.background} + +; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +tray-offset-x = 0 +tray-offset-y = 0 + +; Pad the sides of each tray icon +tray-padding = 0 + +; Scale factor for tray clients +tray-scale = 1.0 + +; Restack the bar window and put it above the +; selected window manager's root +; +; Fixes the issue where the bar is being drawn +; on top of fullscreen window's +; +; Currently supported WM's: +; bspwm +; i3 (requires: `override-redirect = true`) +;;wm-restack = + +; Set a DPI values used when rendering text +; This only affects scalable fonts +; dpi = + +; Enable support for inter-process messaging +; See the Messaging wiki page for more details. +;enable-ipc = true + +; Fallback click handlers that will be called if +; there's no matching module handler found. +click-left = +click-middle = +click-right = +scroll-up = +scroll-down = +double-click-left = +double-click-middle = +double-click-right = + +; Requires polybar to be built with xcursor support (xcb-util-cursor) +; Possible values are: +; - default : The default pointer as before, can also be an empty string (default) +; - pointer : Typically in the form of a hand +; - ns-resize : Up and down arrows, can be used to indicate scrolling +cursor-click = +cursor-scroll = + +;; WM Workspace Specific + +; bspwm +;;scroll-up = bspwm-desknext +;;scroll-down = bspwm-deskprev +;;scroll-up = bspc desktop -f prev.local +;;scroll-down = bspc desktop -f next.local + +;i3 +;;scroll-up = i3wm-wsnext +;;scroll-down = i3wm-wsprev +;;scroll-up = i3-msg workspace next_on_output +;;scroll-down = i3-msg workspace prev_on_output + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Application Settings + +[settings] +; The throttle settings lets the eventloop swallow up til X events +; if they happen within Y millisecond after first event was received. +; This is done to prevent flood of update event. +; +; For example if 5 modules emit an update event at the same time, we really +; just care about the last one. But if we wait too long for events to swallow +; the bar would appear sluggish so we continue if timeout +; expires or limit is reached. +throttle-output = 5 +throttle-output-for = 10 + +; Time in milliseconds that the input handler will wait between processing events +;throttle-input-for = 30 + +; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events +screenchange-reload = false + +; Compositing operators +; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t +compositing-background = source +compositing-foreground = over +compositing-overline = over +compositing-underline = over +compositing-border = over + +; Define fallback values used by all module formats +;format-foreground = +;format-background = +;format-underline = +;format-overline = +;format-spacing = +;format-padding = +;format-margin = +;format-offset = + +; Enables pseudo-transparency for the bar +; If set to true the bar can be transparent without a compositor. +pseudo-transparency = false + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; ┌────────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/sep] +type = custom/text +content = " | " +content-font = 3 + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +[module/sep2] +type = custom/text +content = " " + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/alsa] +type = internal/alsa + +format-volume = <ramp-volume> +format-muted = <label-muted> +label-muted = 婢 +label-muted-foreground = ${color.gray} + +ramp-volume-0 = 奄 +ramp-volume-1 = 奔 +ramp-volume-2 = 奔 +ramp-volume-3 = 墳 +ramp-volume-4 = 墳 +ramp-volume-foreground = ${color.blue} + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/battery] +type = internal/battery + +full-at = 99 +battery = BAT1 +adapter = ACAD + +poll-interval = 2 +time-format = %H:%M + +format-charging = <animation-charging> +format-discharging = <ramp-capacity> + +format-full = <label-full> +format-full-foreground = ${color.red} + +label-full = + +ramp-capacity-0 = +ramp-capacity-1 = +ramp-capacity-2 = +ramp-capacity-3 = +ramp-capacity-4 = +ramp-capacity-5 = +ramp-capacity-6 = +ramp-capacity-7 = +ramp-capacity-8 = +ramp-capacity-9 = +ramp-capacity-foreground = ${color.orange} + +animation-charging-0 = +animation-charging-1 = +animation-charging-2 = +animation-charging-3 = +animation-charging-4 = +animation-charging-5 = +animation-charging-6 = +animation-charging-7 = +animation-charging-8 = +animation-charging-9 = +animation-charging-foreground = ${color.green} + +animation-charging-framerate = 750 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/network] +type = internal/network +interface = wlan0 + +interval = 1.0 +accumulate-stats = true +unknown-as-up = true + +format-connected = <label-connected> +format-connected-foreground = ${color.purple} +format-disconnected = <label-disconnected> +format-disconnected-foreground = ${color.gray} + +label-connected = "%{A1:networkmanager_dmenu &:}直%{A}" +label-disconnected = "%{A1:networkmanager_dmenu &:}睊%{A}" + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/speed] +type = internal/network +interface = wlan0 + +interval = 1.0 +accumulate-stats = true +unknown-as-up = true + +format-connected = <label-connected> +format-connected-foreground = ${color.fg} +format-connected-font = 3 +format-disconnected = <label-disconnected> +format-disconnected-foreground = ${color.fg} +format-disconnected-font = 3 + +label-connected = "%downspeed%" +label-disconnected = NA + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/ssid] +type = internal/network +interface = wlan0 + +interval = 1.0 +accumulate-stats = true +unknown-as-up = true + +format-connected = <label-connected> +format-connected-font = 2 +format-connected-foreground = ${color.fg} +format-disconnected = <label-disconnected> +format-disconnected-foreground = ${color.fg} +format-disconnected-font = 2 + +label-connected = "%essid%" +label-disconnected = NA + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/sysmenu] +type = custom/text +content = 襤 + +content-foreground = ${color.red} +click-left = ~/.config/polybar/pwidgets/scripts/powermenu.sh & +click-right = ~/.config/polybar/pwidgets/scripts/style-switch.sh & + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ diff --git a/config/polybar/pwidgets/workspace.ini b/config/polybar/pwidgets/workspace.ini new file mode 100644 index 0000000..26f439c --- /dev/null +++ b/config/polybar/pwidgets/workspace.ini @@ -0,0 +1,407 @@ +;; ┌────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Global WM Settings + +[global/wm] +; Adjust the _NET_WM_STRUT_PARTIAL top value +; Used for top aligned bars +margin-bottom = 0 + +; Adjust the _NET_WM_STRUT_PARTIAL bottom value +; Used for bottom aligned bars +margin-top = 0 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; File Inclusion +; include an external file, like module file, etc. + +include-file = ~/.config/polybar/pwidgets/colors.ini + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Bar Settings + +[bar/main] +; Use either of the following command to list available outputs: +; If unspecified, the application will pick the first one it finds. +; $ polybar -m | cut -d ':' -f 1 +; $ xrandr -q | grep " connected" | cut -d ' ' -f1 +monitor = + +; Use the specified monitor as a fallback if the main one is not found. +monitor-fallback = + +; Require the monitor to be in connected state +; XRandR sometimes reports my monitor as being disconnected (when in use) +monitor-strict = false + +; Tell the Window Manager not to configure the window. +; Use this to detach the bar if your WM is locking its size/position. +override-redirect = false + +; Put the bar at the bottom of the screen +bottom = true + +; Prefer fixed center position for the `modules-center` block +; When false, the center position will be based on the size of the other blocks. +fixed-center = true + +; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in a width or height of 50% minus 10 pixels +width = 230 +height = 60 + +; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +; the percentage can optionally be extended with a pixel offset like so: +; 50%:-10, this will result in an offset in the x or y direction +; of 50% minus 10 pixels +offset-x = 0 +offset-y = 0 + +; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) +background = ${color.bg} + +; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) +foreground = ${color.fg} + +; Background gradient (vertical steps) +; background-[0-9]+ = #aarrggbb +;;background-0 = + +; Value used for drawing rounded corners +; Note: This shouldn't be used together with border-size because the border +; doesn't get rounded +; Individual top/bottom values can be defined using: +; radius-{top,bottom} +radius-top = 20.0 +radius-bottom = 20.0 + +; Under-/overline pixel size and argb color +; Individual values can be defined using: +; {overline,underline}-size +; {overline,underline}-color +line-size = 2 +line-color = ${color.ac} + +; Values applied to all borders +; Individual side values can be defined using: +; border-{left,top,right,bottom}-size +; border-{left,top,right,bottom}-color +; The top and bottom borders are added to the bar height, so the effective +; window height is: +; height + border-top-size + border-bottom-size +; Meanwhile the effective window width is defined entirely by the width key and +; the border is placed withing this area. So you effectively only have the +; following horizontal space on the bar: +; width - border-right-size - border-left-size +border-bottom-size = 0 +border-color = ${color.ac} + +; Number of spaces to add at the beginning/end of the bar +; Individual side values can be defined using: +; padding-{left,right} +padding = 2 + +; Number of spaces to add before/after each module +; Individual side values can be defined using: +; module-margin-{left,right} +module-margin-left = 1 +module-margin-right = 1 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; Fonts are defined using <font-name>;<vertical-offset> +; Font names are specified using a fontconfig pattern. +; font-0 = NotoSans-Regular:size=8;2 +; font-1 = MaterialIcons:size=10 +; font-2 = Termsynu:size=8;-1 +; font-3 = FontAwesome:size=10 +; See the Fonts wiki page for more details + +font-0 = "Iosevka Nerd Font:size=18;5" +font-1 = "Iosevka Nerd Font:size=12;2" +font-2 = "Iosevka Nerd Font:bold:size=24;2" + +; Modules are added to one of the available blocks +; modules-left = cpu ram +; modules-center = xwindow xbacklight +; modules-right = ipc clock + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[bar/primary] +inherit = bar/main +offset-x = 25 +offset-y = 25 + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-center = workspaces +enable-ipc = true + +[bar/secondary] +inherit = bar/main +offset-x = 25 +offset-y = 75 +background = ${color.trans} +foreground = ${color.white} + +padding = 1 +module-margin-left = 0 +module-margin-right = 0 + +modules-left = name sep title +enable-ipc = true + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +; The separator will be inserted between the output of each module +separator = + +; Opacity value between 0.0 and 1.0 used on fade in/out +dim-value = 1.0 + +; Value to be used to set the WM_NAME atom +; If the value is empty or undefined, the atom value +; will be created from the following template: polybar-[BAR]_[MONITOR] +; NOTE: The placeholders are not available for custom values +wm-name = + +; Locale used to localize various module data (e.g. date) +; Expects a valid libc locale, for example: sv_SE.UTF-8 +locale = + +; Position of the system tray window +; If empty or undefined, tray support will be disabled +; NOTE: A center aligned tray will cover center aligned modules +; +; Available positions: +; left +; center +; right +; none +tray-position = none + +; If true, the bar will not shift its +; contents when the tray changes +tray-detached = false + +; Tray icon max size +tray-maxsize = 16 + +; Background color for the tray container +; ARGB color (e.g. #f00, #ff992a, #ddff1023) +; By default the tray container will use the bar +; background color. +tray-background = ${color.background} + +; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) +tray-offset-x = 0 +tray-offset-y = 0 + +; Pad the sides of each tray icon +tray-padding = 0 + +; Scale factor for tray clients +tray-scale = 1.0 + +; Restack the bar window and put it above the +; selected window manager's root +; +; Fixes the issue where the bar is being drawn +; on top of fullscreen window's +; +; Currently supported WM's: +; bspwm +; i3 (requires: `override-redirect = true`) +;;wm-restack = + +; Set a DPI values used when rendering text +; This only affects scalable fonts +; dpi = + +; Enable support for inter-process messaging +; See the Messaging wiki page for more details. +;enable-ipc = true + +; Fallback click handlers that will be called if +; there's no matching module handler found. +click-left = +click-middle = +click-right = +scroll-up = +scroll-down = +double-click-left = +double-click-middle = +double-click-right = + +; Requires polybar to be built with xcursor support (xcb-util-cursor) +; Possible values are: +; - default : The default pointer as before, can also be an empty string (default) +; - pointer : Typically in the form of a hand +; - ns-resize : Up and down arrows, can be used to indicate scrolling +cursor-click = +cursor-scroll = + +;; WM Workspace Specific + +; bspwm +;;scroll-up = bspwm-desknext +;;scroll-down = bspwm-deskprev +;;scroll-up = bspc desktop -f prev.local +;;scroll-down = bspc desktop -f next.local + +;i3 +;;scroll-up = i3wm-wsnext +;;scroll-down = i3wm-wsprev +;;scroll-up = i3-msg workspace next_on_output +;;scroll-down = i3-msg workspace prev_on_output + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; Application Settings + +[settings] +; The throttle settings lets the eventloop swallow up til X events +; if they happen within Y millisecond after first event was received. +; This is done to prevent flood of update event. +; +; For example if 5 modules emit an update event at the same time, we really +; just care about the last one. But if we wait too long for events to swallow +; the bar would appear sluggish so we continue if timeout +; expires or limit is reached. +throttle-output = 5 +throttle-output-for = 10 + +; Time in milliseconds that the input handler will wait between processing events +;throttle-input-for = 30 + +; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events +screenchange-reload = false + +; Compositing operators +; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t +compositing-background = source +compositing-foreground = over +compositing-overline = over +compositing-underline = over +compositing-border = over + +; Define fallback values used by all module formats +;format-foreground = +;format-background = +;format-underline = +;format-overline = +;format-spacing = +;format-padding = +;format-margin = +;format-offset = + +; Enables pseudo-transparency for the bar +; If set to true the bar can be transparent without a compositor. +pseudo-transparency = false + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +;; ┌────────────────────────────────────────────────────────────────┐ +;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│ +;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│ +;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│ +;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ +;; └────────────────────────────────────────────────────────────────┘ + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/workspaces] +type = internal/xworkspaces + +pin-workspaces = true +enable-click = true +enable-scroll = true + +;icon-0 = 1; +;icon-1 = 2; +;icon-2 = 3; +;icon-3 = 4; +;icon-4 = 5; +icon-default = " " + +format = <label-state> +format-padding = 0 + +label-active = " " +label-active-foreground = ${color.pink} +label-active-background = ${color.bg} + +label-occupied = " " +label-occupied-foreground = ${color.blue} +label-occupied-background = ${color.bg} + +label-urgent = " " +label-urgent-foreground = ${color.red} +label-urgent-background = ${color.bg} + +label-empty = " " +label-empty-foreground = ${color.gray} +label-empty-background = ${color.bg} + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/name] +type = internal/xworkspaces + +format = <label-state> +format-foreground = ${color.fg} +format-font = 3 +format-padding = 0 + +label-active = "%name%" + +label-occupied = +label-urgent = +label-empty = + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/title] +type = internal/xwindow + +format = <label> +format-foreground = ${color.fg} +format-font = 2 + +label = %title% +label-maxlen = 20 +label-empty = Desktop + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ + +[module/sep] +type = custom/text +content = " | " +content-font = 2 + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +[module/sep2] +type = custom/text +content = " " + +;;content-background = #000 +content-foreground = ${color.fg} +;;content-padding = 4 + +;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ |