Reset everything

1 files changed, 0 insertions, 616 deletions

diff --git a/config/polybar/panels/panel/xubuntu.ini b/config/polybar/panels/panel/xubuntu.ini
deleted file mode 100644
index cefbe10..0000000
--- a/config/polybar/panels/panel/xubuntu.ini
+++ /dev/null
@@ -1,616 +0,0 @@
-;; ┌────────────────────────────────────────────────────────────┐
-;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│
-;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│
-;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│
-;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│
-;; └────────────────────────────────────────────────────────────┘
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-;; Global WM Settings
-
-[global/wm]
-; Adjust the _NET_WM_STRUT_PARTIAL top value
-; Used for top aligned bars
-margin-bottom = 0
-
-; Adjust the _NET_WM_STRUT_PARTIAL bottom value
-; Used for bottom aligned bars
-margin-top = 0
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-;; Bar Settings
-
-[bar/main]
-; Use either of the following command to list available outputs:
-; If unspecified, the application will pick the first one it finds.
-; $ polybar -m | cut -d ':' -f 1
-; $ xrandr -q | grep " connected" | cut -d ' ' -f1
-monitor =
-
-; Use the specified monitor as a fallback if the main one is not found.
-monitor-fallback =
-
-; Require the monitor to be in connected state
-; XRandR sometimes reports my monitor as being disconnected (when in use)
-monitor-strict = false
-
-; Tell the Window Manager not to configure the window.
-; Use this to detach the bar if your WM is locking its size/position.
-override-redirect = false
-
-; Put the bar at the bottom of the screen
-bottom = false
-
-; Prefer fixed center position for the `modules-center` block
-; When false, the center position will be based on the size of the other blocks.
-fixed-center = true
-
-; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
-; the percentage can optionally be extended with a pixel offset like so:
-; 50%:-10, this will result in a width or height of 50% minus 10 pixels
-width = 100%
-height = 30
-
-; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
-; the percentage can optionally be extended with a pixel offset like so:
-; 50%:-10, this will result in an offset in the x or y direction 
-; of 50% minus 10 pixels
-offset-x = 0
-offset-y = 0
-
-; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
-background = ${color.bg}
-
-; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
-foreground = ${color.fg}
-
-; Background gradient (vertical steps)
-;   background-[0-9]+ = #aarrggbb
-;;background-0 = 
-
-; Value used for drawing rounded corners
-; Note: This shouldn't be used together with border-size because the border 
-; doesn't get rounded
-; Individual top/bottom values can be defined using:
-;   radius-{top,bottom}
-radius-top = 0.0
-radius-bottom = 0.0
-
-; Under-/overline pixel size and argb color
-; Individual values can be defined using:
-;   {overline,underline}-size
-;   {overline,underline}-color
-;;overline-size = 0
-;;overline-color = ${color.ac}
-
-; Values applied to all borders
-; Individual side values can be defined using:
-;   border-{left,top,right,bottom}-size
-;   border-{left,top,right,bottom}-color
-; The top and bottom borders are added to the bar height, so the effective
-; window height is:
-;   height + border-top-size + border-bottom-size
-; Meanwhile the effective window width is defined entirely by the width key and
-; the border is placed withing this area. So you effectively only have the
-; following horizontal space on the bar:
-;   width - border-right-size - border-left-size
-border-bottom-size = 1
-border-color = ${color.ac}
-
-; Number of spaces to add at the beginning/end of the bar
-; Individual side values can be defined using:
-;   padding-{left,right}
-padding = 2
-
-; Number of spaces to add before/after each module
-; Individual side values can be defined using:
-;   module-margin-{left,right}
-module-margin-left = 2
-module-margin-right = 2
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-; Fonts are defined using <font-name>;<vertical-offset>
-; Font names are specified using a fontconfig pattern.
-;   font-0 = NotoSans-Regular:size=8;2
-;   font-1 = MaterialIcons:size=10
-;   font-2 = Termsynu:size=8;-1
-;   font-3 = FontAwesome:size=10
-; See the Fonts wiki page for more details
-
-font-0 = "Noto Sans:size=9:weight:bold;3"
-font-1 = "Iosevka Nerd Font:size=12;3"
-
-; Modules are added to one of the available blocks
-;   modules-left = cpu ram
-;   modules-center = xwindow xbacklight
-;   modules-right = ipc clock
-
-modules-left = menu
-modules-center = 
-modules-right = style battery alsa network date workspaces name sysmenu
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-; The separator will be inserted between the output of each module
-separator =
-
-; Opacity value between 0.0 and 1.0 used on fade in/out
-dim-value = 1.0
-
-; Value to be used to set the WM_NAME atom
-; If the value is empty or undefined, the atom value
-; will be created from the following template: polybar-[BAR]_[MONITOR]
-; NOTE: The placeholders are not available for custom values
-wm-name = 
-
-; Locale used to localize various module data (e.g. date)
-; Expects a valid libc locale, for example: sv_SE.UTF-8
-locale = 
-
-; Position of the system tray window
-; If empty or undefined, tray support will be disabled
-; NOTE: A center aligned tray will cover center aligned modules
-;
-; Available positions:
-;   left
-;   center
-;   right
-;   none
-tray-position = none
-
-; If true, the bar will not shift its
-; contents when the tray changes
-tray-detached = false
-
-; Tray icon max size
-tray-maxsize = 16
-
-; Background color for the tray container 
-; ARGB color (e.g. #f00, #ff992a, #ddff1023)
-; By default the tray container will use the bar
-; background color.
-tray-background = ${color.background}
-
-; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
-tray-offset-x = 0
-tray-offset-y = 0
-
-; Pad the sides of each tray icon
-tray-padding = 0
-
-; Scale factor for tray clients
-tray-scale = 1.0
-
-; Restack the bar window and put it above the
-; selected window manager's root
-;
-; Fixes the issue where the bar is being drawn
-; on top of fullscreen window's
-;
-; Currently supported WM's:
-;   bspwm
-;   i3 (requires: `override-redirect = true`)
-;;wm-restack =
-
-; Set a DPI values used when rendering text
-; This only affects scalable fonts
-; dpi = 
-
-; Enable support for inter-process messaging
-; See the Messaging wiki page for more details.
-enable-ipc = true
-
-; Fallback click handlers that will be called if
-; there's no matching module handler found.
-click-left = 
-click-middle = 
-click-right =
-scroll-up =
-scroll-down =
-double-click-left =
-double-click-middle =
-double-click-right =
-
-; Requires polybar to be built with xcursor support (xcb-util-cursor)
-; Possible values are:
-; - default   : The default pointer as before, can also be an empty string (default)
-; - pointer   : Typically in the form of a hand
-; - ns-resize : Up and down arrows, can be used to indicate scrolling
-cursor-click = 
-cursor-scroll = 
-
-;; WM Workspace Specific
-
-; bspwm
-;;scroll-up = bspwm-desknext
-;;scroll-down = bspwm-deskprev
-;;scroll-up = bspc desktop -f prev.local
-;;scroll-down = bspc desktop -f next.local
-
-;i3
-;;scroll-up = i3wm-wsnext
-;;scroll-down = i3wm-wsprev
-;;scroll-up = i3-msg workspace next_on_output
-;;scroll-down = i3-msg workspace prev_on_output
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-;; Application Settings
-
-[settings]
-; The throttle settings lets the eventloop swallow up til X events
-; if they happen within Y millisecond after first event was received.
-; This is done to prevent flood of update event.
-;
-; For example if 5 modules emit an update event at the same time, we really
-; just care about the last one. But if we wait too long for events to swallow
-; the bar would appear sluggish so we continue if timeout
-; expires or limit is reached.
-throttle-output = 5
-throttle-output-for = 10
-
-; Time in milliseconds that the input handler will wait between processing events
-;throttle-input-for = 30
-
-; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
-screenchange-reload = false
-
-; Compositing operators
-; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
-compositing-background = source
-compositing-foreground = over
-compositing-overline = over
-compositing-underline = over
-compositing-border = over
-
-; Define fallback values used by all module formats
-;format-foreground = 
-;format-background = 
-;format-underline =
-;format-overline =
-;format-spacing =
-;format-padding =
-;format-margin =
-;format-offset =
-
-; Enables pseudo-transparency for the bar
-; If set to true the bar can be transparent without a compositor.
-pseudo-transparency = false
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-;; ┌────────────────────────────────────────────────────────────┐
-;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█░░░█▀█░█▀▄░█▀▀│
-;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░░░█░█░█▀▄░▀▀█│
-;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀▀▀░▀▀▀░▀░▀░▀▀▀│
-;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│
-;; └────────────────────────────────────────────────────────────┘
-;;
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[color]
-
-;; Active Colors
-bg = #494949
-bg-alt = #333333
-fg-ac = #536579
-fg = #EAEAEA
-fg-alt = #9C9C9C
-ac = #000000
-
-trans = #00000000
-white = #FFFFFF
-black = #000000
-
-;; Material Colors
-
-red = #e53935
-pink = #d81b60
-purple = #8e24aa
-deep-purple = #5e35b1
-indigo = #3949ab
-blue = #1e88e5
-light-blue = #039be5
-cyan = #00acc1
-teal = #00897b
-green = #43a047
-light-green = #7cb342
-lime = #c0ca33
-yellow = #fdd835
-amber = #ffb300
-orange = #fb8c00
-deep-orange = #f4511e
-brown = #6d4c41
-grey = #757575
-blue-gray = #546e7a
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-;; ┌────────────────────────────────────────────────────────────────┐
-;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│
-;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│
-;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│
-;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
-;; └────────────────────────────────────────────────────────────────┘
-;;
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/alsa]
-type = internal/alsa
-
-; You can find the different card numbers in `/proc/asound/cards`
-;;master-soundcard = default
-;;speaker-soundcard = default
-;;headphone-soundcard = default
-
-; Default: Master
-;;master-mixer = Master
-
-; Optionally define speaker and headphone mixers
-; Default: none
-;;speaker-mixer = Speaker
-; Default: none
-;;headphone-mixer = Headphone
-
-; Default: 5
-;;interval = 5
-
-; Available tags:
-;   <label-volume> (default)
-;   <ramp-volume>
-;   <bar-volume>
-format-volume = <ramp-volume>
-
-; Available tags:
-;   <label-muted> (default)
-;   <ramp-volume>
-;   <bar-volume>
-;format-muted = <label-muted>
-
-; Available tokens:
-;   %percentage% (default)
-label-volume = %percentage%%
-
-; Available tokens:
-;   %percentage% (default
-label-muted = ﱝ
-label-muted-foreground = ${color.fg-alt}
-
-ramp-volume-0 = 
-ramp-volume-1 = 
-ramp-volume-2 = 
-ramp-volume-3 = 
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/battery]
-type = internal/battery
-
-full-at = 99
-
-; $ ls -1 /sys/class/power_supply/
-battery = BAT1
-adapter = ACAD
-
-poll-interval = 2
-time-format = %H:%M
-
-; Available tags:
-;   <label-charging> (default)
-;   <bar-capacity>
-;   <ramp-capacity>
-;   <animation-charging>
-format-charging = <animation-charging>
-
-; Available tags:
-;   <label-discharging> (default)
-;   <bar-capacity>
-;   <ramp-capacity>
-;   <animation-discharging>
-format-discharging = <ramp-capacity>
-
-; Available tags:
-;   <label-full> (default)
-;   <bar-capacity>
-;   <ramp-capacity>
-;format-full = <ramp-capacity> <label-full>
-
-; Available tokens:
-;   %percentage% (default)
-;   %time%
-;   %consumption% (shows current charge rate in watts)
-label-charging = %percentage%%
-
-; Available tokens:
-;   %percentage% (default)
-;   %time%
-;   %consumption% (shows current discharge rate in watts)
-label-discharging = %percentage%%
-
-; Available tokens:
-;   %percentage% (default)
-;label-full = Fully Charged
-label-full = 
-label-full-foreground = ${color.green} 
-
-ramp-capacity-0 = 
-ramp-capacity-1 = 
-ramp-capacity-2 = 
-ramp-capacity-3 = 
-ramp-capacity-4 = 
-
-animation-charging-0 = 
-animation-charging-1 = 
-animation-charging-2 = 
-animation-charging-3 = 
-animation-charging-4 = 
-
-; Framerate in milliseconds
-animation-charging-framerate = 750
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/date]
-type = internal/date
-
-interval = 1.0
-
-time = %a,  %d %B   %I:%M %p
-
-format = <label>
-label = %time%
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/network]
-type = internal/network
-
-interface = wlan0
-interval = 1.0
-
-;ping-interval = 3
-;;udspeed-minwidth = 5
-accumulate-stats = true
-unknown-as-up = true
-
-; Available tags:
-;   <label-connected> (default)
-;   <ramp-signal>
-format-connected = <label-connected>
-
-; Available tags:
-;   <label-disconnected> (default)
-format-disconnected = <label-disconnected>
-
-; Available tags:
-;   <label-connected> (default)
-;   <label-packetloss>
-;   <animation-packetloss>
-;;format-packetloss = <animation-packetloss> <label-connected>
-
-; Available tokens:
-;   %ifname%    [wireless+wired]
-;   %local_ip%  [wireless+wired]
-;   %local_ip6% [wireless+wired]
-;   %essid%     [wireless]
-;   %signal%    [wireless]
-;   %upspeed%   [wireless+wired]
-;   %downspeed% [wireless+wired]
-;   %linkspeed% [wired]
-; Default: %ifname% %local_ip%
-label-connected = "%{A1:networkmanager_dmenu &:}直%{A}"
-
-; Available tokens:
-;   %ifname%    [wireless+wired]
-; Default: (none)
-label-disconnected = "%{A1:networkmanager_dmenu &:}睊%{A}"
-label-disconnected-foreground = ${color.fg-alt}
-
-; Available tokens:
-;   %ifname%    [wireless+wired]
-;   %local_ip%  [wireless+wired]
-;   %local_ip6% [wireless+wired]
-;   %essid%     [wireless]
-;   %signal%    [wireless]
-;   %upspeed%   [wireless+wired]
-;   %downspeed% [wireless+wired]
-;   %linkspeed% [wired]
-; Default: (none)
-;label-packetloss = %essid%
-;label-packetloss-foreground = #eefafafa
-
-ramp-signal-0 = 直
-ramp-signal-1 = 直
-ramp-signal-2 = 直
-ramp-signal-3 = 直
-ramp-signal-4 = 直
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/workspaces]
-type = internal/xworkspaces
-
-pin-workspaces = false
-enable-click = true
-enable-scroll = true
-
-format = <label-state>
-format-background = ${color.bg}
-
-label-active = 
-label-urgent = 
-label-occupied = 
-label-empty = 
-icon-default = 
-
-label-empty-padding = 1
-label-active-padding = 1
-label-urgent-padding = 1
-label-occupied-padding = 1
-
-label-empty-foreground = ${color.bg-alt}
-label-active-foreground = ${color.fg-ac}
-label-urgent-foreground = ${color.red}
-label-occupied-foreground = ${color.bg-alt}
-
-label-empty-background = ${color.bg-alt}
-label-active-background = ${color.fg-ac}
-label-urgent-background = ${color.red}
-label-occupied-background = ${color.bg-alt}
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/menu]
-type = custom/text
-
-content = 
-;;content-background = ${color.bg}
-content-foreground = ${color.blue}
-;;content-padding = 4
-
-click-left = ~/.config/polybar/panels/scripts/launcher.sh --xubuntu
-click-right = ~/.config/polybar/panels/scripts/launcher.sh --xubuntu
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/sysmenu]
-type = custom/text
-
-content = 襤
-;;content-background = ${color.bg}
-content-foreground = ${color.fg}
-;;content-padding = 4
-
-click-left = ~/.config/polybar/panels/scripts/powermenu.sh --xubuntu
-click-right = ~/.config/polybar/panels/scripts/powermenu.sh --xubuntu
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/name]
-type = custom/text
-content = Aditya
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/style]
-type = custom/text
-content = פֿ
-
-click-left = ~/.config/polybar/panels/scripts/style-switch.sh --xubuntu
-click-right = ~/.config/polybar/panels/scripts/style-switch.sh --xubuntu
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[module/title]
-type = internal/xwindow
-
-format = <label>
-
-label = %title%
-label-maxlen = 20
-label-empty = Desktop
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_