diff options
Diffstat (limited to 'config/polybar/panels/panel/zorin.ini')
| -rw-r--r-- | config/polybar/panels/panel/zorin.ini | 641 |
1 files changed, 0 insertions, 641 deletions
diff --git a/config/polybar/panels/panel/zorin.ini b/config/polybar/panels/panel/zorin.ini deleted file mode 100644 index aea0117..0000000 --- a/config/polybar/panels/panel/zorin.ini +++ /dev/null @@ -1,641 +0,0 @@ -;; ┌────────────────────────────────────────────────────────────┐ -;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│ -;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│ -;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│ -;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ -;; └────────────────────────────────────────────────────────────┘ - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; Global WM Settings - -[global/wm] -; Adjust the _NET_WM_STRUT_PARTIAL top value -; Used for top aligned bars -margin-bottom = 0 - -; Adjust the _NET_WM_STRUT_PARTIAL bottom value -; Used for bottom aligned bars -margin-top = 0 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; Bar Settings - -[bar/main] -; Use either of the following command to list available outputs: -; If unspecified, the application will pick the first one it finds. -; $ polybar -m | cut -d ':' -f 1 -; $ xrandr -q | grep " connected" | cut -d ' ' -f1 -monitor = - -; Use the specified monitor as a fallback if the main one is not found. -monitor-fallback = - -; Require the monitor to be in connected state -; XRandR sometimes reports my monitor as being disconnected (when in use) -monitor-strict = false - -; Tell the Window Manager not to configure the window. -; Use this to detach the bar if your WM is locking its size/position. -override-redirect = false - -; Put the bar at the bottom of the screen -bottom = true - -; Prefer fixed center position for the `modules-center` block -; When false, the center position will be based on the size of the other blocks. -fixed-center = true - -; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%), -; the percentage can optionally be extended with a pixel offset like so: -; 50%:-10, this will result in a width or height of 50% minus 10 pixels -width = 100% -height = 42 - -; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) -; the percentage can optionally be extended with a pixel offset like so: -; 50%:-10, this will result in an offset in the x or y direction -; of 50% minus 10 pixels -offset-x = 0 -offset-y = 0 - -; Background ARGB color (e.g. #f00, #ff992a, #ddff1023) -background = ${color.bg} - -; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023) -foreground = ${color.fg} - -; Background gradient (vertical steps) -; background-[0-9]+ = #aarrggbb -;;background-0 = - -; Value used for drawing rounded corners -; Note: This shouldn't be used together with border-size because the border -; doesn't get rounded -; Individual top/bottom values can be defined using: -; radius-{top,bottom} -radius-top = 0.0 -radius-bottom = 0.0 - -; Under-/overline pixel size and argb color -; Individual values can be defined using: -; {overline,underline}-size -; {overline,underline}-color -;;overline-size = 0 -;;overline-color = ${color.ac} - -; Values applied to all borders -; Individual side values can be defined using: -; border-{left,top,right,bottom}-size -; border-{left,top,right,bottom}-color -; The top and bottom borders are added to the bar height, so the effective -; window height is: -; height + border-top-size + border-bottom-size -; Meanwhile the effective window width is defined entirely by the width key and -; the border is placed withing this area. So you effectively only have the -; following horizontal space on the bar: -; width - border-right-size - border-left-size -;;border-size = 1 -;;border-color = ${color.bg} - -; Number of spaces to add at the beginning/end of the bar -; Individual side values can be defined using: -; padding-{left,right} -padding = 0 - -; Number of spaces to add before/after each module -; Individual side values can be defined using: -; module-margin-{left,right} -module-margin-left = 3 -module-margin-right = 3 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -; Fonts are defined using <font-name>;<vertical-offset> -; Font names are specified using a fontconfig pattern. -; font-0 = NotoSans-Regular:size=8;2 -; font-1 = MaterialIcons:size=10 -; font-2 = Termsynu:size=8;-1 -; font-3 = FontAwesome:size=10 -; See the Fonts wiki page for more details - -font-0 = "Noto Sans:size=9;4" -font-1 = "icomoon\-feather:size=10;4" -font-2 = "Iosevka Nerd Font:size=20;5" -font-3 = "Noto Sans:size=8;4" - -; Modules are added to one of the available blocks -; modules-left = cpu ram -; modules-center = xwindow xbacklight -; modules-right = ipc clock - -modules-left = menu term web files settings -modules-center = -modules-right = style network alsa battery date sysmenu - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -; The separator will be inserted between the output of each module -separator = - -; Opacity value between 0.0 and 1.0 used on fade in/out -dim-value = 1.0 - -; Value to be used to set the WM_NAME atom -; If the value is empty or undefined, the atom value -; will be created from the following template: polybar-[BAR]_[MONITOR] -; NOTE: The placeholders are not available for custom values -wm-name = - -; Locale used to localize various module data (e.g. date) -; Expects a valid libc locale, for example: sv_SE.UTF-8 -locale = - -; Position of the system tray window -; If empty or undefined, tray support will be disabled -; NOTE: A center aligned tray will cover center aligned modules -; -; Available positions: -; left -; center -; right -; none -tray-position = none - -; If true, the bar will not shift its -; contents when the tray changes -tray-detached = false - -; Tray icon max size -tray-maxsize = 16 - -; Background color for the tray container -; ARGB color (e.g. #f00, #ff992a, #ddff1023) -; By default the tray container will use the bar -; background color. -tray-background = ${color.background} - -; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%) -tray-offset-x = 0 -tray-offset-y = 0 - -; Pad the sides of each tray icon -tray-padding = 0 - -; Scale factor for tray clients -tray-scale = 1.0 - -; Restack the bar window and put it above the -; selected window manager's root -; -; Fixes the issue where the bar is being drawn -; on top of fullscreen window's -; -; Currently supported WM's: -; bspwm -; i3 (requires: `override-redirect = true`) -;;wm-restack = - -; Set a DPI values used when rendering text -; This only affects scalable fonts -; dpi = - -; Enable support for inter-process messaging -; See the Messaging wiki page for more details. -enable-ipc = true - -; Fallback click handlers that will be called if -; there's no matching module handler found. -click-left = -click-middle = -click-right = -scroll-up = -scroll-down = -double-click-left = -double-click-middle = -double-click-right = - -; Requires polybar to be built with xcursor support (xcb-util-cursor) -; Possible values are: -; - default : The default pointer as before, can also be an empty string (default) -; - pointer : Typically in the form of a hand -; - ns-resize : Up and down arrows, can be used to indicate scrolling -cursor-click = -cursor-scroll = - -;; WM Workspace Specific - -; bspwm -;;scroll-up = bspwm-desknext -;;scroll-down = bspwm-deskprev -;;scroll-up = bspc desktop -f prev.local -;;scroll-down = bspc desktop -f next.local - -;i3 -;;scroll-up = i3wm-wsnext -;;scroll-down = i3wm-wsprev -;;scroll-up = i3-msg workspace next_on_output -;;scroll-down = i3-msg workspace prev_on_output - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; Application Settings - -[settings] -; The throttle settings lets the eventloop swallow up til X events -; if they happen within Y millisecond after first event was received. -; This is done to prevent flood of update event. -; -; For example if 5 modules emit an update event at the same time, we really -; just care about the last one. But if we wait too long for events to swallow -; the bar would appear sluggish so we continue if timeout -; expires or limit is reached. -throttle-output = 5 -throttle-output-for = 10 - -; Time in milliseconds that the input handler will wait between processing events -;throttle-input-for = 30 - -; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events -screenchange-reload = false - -; Compositing operators -; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t -compositing-background = source -compositing-foreground = over -compositing-overline = over -compositing-underline = over -compositing-border = over - -; Define fallback values used by all module formats -;format-foreground = -;format-background = -;format-underline = -;format-overline = -;format-spacing = -;format-padding = -;format-margin = -;format-offset = - -; Enables pseudo-transparency for the bar -; If set to true the bar can be transparent without a compositor. -pseudo-transparency = false - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; ┌────────────────────────────────────────────────────────────┐ -;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█░░░█▀█░█▀▄░█▀▀│ -;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░░░█░█░█▀▄░▀▀█│ -;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀▀▀░▀▀▀░▀░▀░▀▀▀│ -;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│ -;; └────────────────────────────────────────────────────────────┘ -;; -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[color] - -;; Active Colors -bg = #80000000 -bg-alt = #1A000000 -fg = #EAEAEA -fg-alt = #9C9C9C -ac= #8EDBF2 - -trans = #00000000 -white = #FFFFFF -black = #000000 - -;; Material Colors - -red = #e53935 -pink = #d81b60 -purple = #8e24aa -deep-purple = #5e35b1 -indigo = #3949ab -blue = #1e88e5 -light-blue = #039be5 -cyan = #00acc1 -teal = #00897b -green = #43a047 -light-green = #7cb342 -lime = #c0ca33 -yellow = #fdd835 -amber = #ffb300 -orange = #fb8c00 -deep-orange = #f4511e -brown = #6d4c41 -grey = #757575 -blue-gray = #546e7a - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -;; ┌────────────────────────────────────────────────────────────────┐ -;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│ -;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│ -;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│ -;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│ -;; └────────────────────────────────────────────────────────────────┘ -;; -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/alsa] -type = internal/alsa - -; You can find the different card numbers in `/proc/asound/cards` -;;master-soundcard = default -;;speaker-soundcard = default -;;headphone-soundcard = default - -; Default: Master -;;master-mixer = Master - -; Optionally define speaker and headphone mixers -; Default: none -;;speaker-mixer = Speaker -; Default: none -;;headphone-mixer = Headphone - -; Default: 5 -;;interval = 5 - -; Available tags: -; <label-volume> (default) -; <ramp-volume> -; <bar-volume> -format-volume = <ramp-volume> - -; Available tags: -; <label-muted> (default) -; <ramp-volume> -; <bar-volume> -;format-muted = <label-muted> - -; Available tokens: -; %percentage% (default) -label-volume = %percentage%% - -; Available tokens: -; %percentage% (default -label-muted = -label-muted-foreground = ${color.fg-alt} - -ramp-volume-0 = -ramp-volume-1 = -ramp-volume-2 = -ramp-volume-3 = -ramp-volume-4 = - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/battery] -type = internal/battery - -full-at = 99 - -; $ ls -1 /sys/class/power_supply/ -battery = BAT1 -adapter = ACAD - -poll-interval = 2 -time-format = %H:%M - -; Available tags: -; <label-charging> (default) -; <bar-capacity> -; <ramp-capacity> -; <animation-charging> -format-charging = <animation-charging> - -; Available tags: -; <label-discharging> (default) -; <bar-capacity> -; <ramp-capacity> -; <animation-discharging> -format-discharging = <ramp-capacity> <label-discharging> - -; Available tags: -; <label-full> (default) -; <bar-capacity> -; <ramp-capacity> -;format-full = <ramp-capacity> <label-full> - -; Available tokens: -; %percentage% (default) -; %time% -; %consumption% (shows current charge rate in watts) -label-charging = %percentage%% - -; Available tokens: -; %percentage% (default) -; %time% -; %consumption% (shows current discharge rate in watts) -label-discharging = " %percentage%%" -label-discharging-font = 4 - -; Available tokens: -; %percentage% (default) -;label-full = Fully Charged -label-full = -label-full-foreground = ${color.green} - -ramp-capacity-0 = -ramp-capacity-1 = -ramp-capacity-2 = -ramp-capacity-3 = -ramp-capacity-4 = -ramp-capacity-5 = -ramp-capacity-6 = -ramp-capacity-7 = -ramp-capacity-8 = -ramp-capacity-9 = - -animation-charging-0 = -animation-charging-1 = -animation-charging-2 = -animation-charging-3 = -animation-charging-4 = -animation-charging-5 = -animation-charging-6 = -animation-charging-7 = -animation-charging-8 = - -; Framerate in milliseconds -animation-charging-framerate = 750 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/date] -type = internal/date - -interval = 1.0 - -time = %I:%M %p -;;time-alt = %B %d, %Y - -format = <label> -;format-padding = 3 - -label = %time% - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/network] -type = internal/network - -interface = wlan0 -interval = 1.0 - -;ping-interval = 3 -;;udspeed-minwidth = 5 -accumulate-stats = true -unknown-as-up = true - -; Available tags: -; <label-connected> (default) -; <ramp-signal> -format-connected = <label-connected> - -; Available tags: -; <label-disconnected> (default) -format-disconnected = <label-disconnected> - -; Available tags: -; <label-connected> (default) -; <label-packetloss> -; <animation-packetloss> -;;format-packetloss = <animation-packetloss> <label-connected> - -; Available tokens: -; %ifname% [wireless+wired] -; %local_ip% [wireless+wired] -; %local_ip6% [wireless+wired] -; %essid% [wireless] -; %signal% [wireless] -; %upspeed% [wireless+wired] -; %downspeed% [wireless+wired] -; %linkspeed% [wired] -; Default: %ifname% %local_ip% -label-connected = "%{A1:networkmanager_dmenu &:}%{A}" - -; Available tokens: -; %ifname% [wireless+wired] -; Default: (none) -label-disconnected = "%{A1:networkmanager_dmenu &:}%{A}" -label-disconnected-foreground = ${color.fg-alt} - -; Available tokens: -; %ifname% [wireless+wired] -; %local_ip% [wireless+wired] -; %local_ip6% [wireless+wired] -; %essid% [wireless] -; %signal% [wireless] -; %upspeed% [wireless+wired] -; %downspeed% [wireless+wired] -; %linkspeed% [wired] -; Default: (none) -;label-packetloss = %essid% -;label-packetloss-foreground = #eefafafa - -ramp-signal-0 = -ramp-signal-1 = -ramp-signal-2 = -ramp-signal-3 = -ramp-signal-4 = - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/sysmenu] -type = custom/text - -content = " " -;;content-background = ${color.bg} -content-foreground = ${color.fg} -;content-padding = 1 - -click-left = ~/.config/polybar/panels/scripts/powermenu.sh --zorin -click-right = ~/.config/polybar/panels/scripts/powermenu.sh --zorin - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/style] -type = custom/text -content = - -click-left = ~/.config/polybar/panels/scripts/style-switch.sh --zorin -click-right = ~/.config/polybar/panels/scripts/style-switch.sh --zorin - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/sep] -type = custom/text - -content = | -content-foreground = ${color.bg} -content-background = ${color.bg} -content-padding = 0 - -[module/sep2] -type = custom/text - -content = | -content-foreground = ${color.bg-alt} -content-background = ${color.bg-alt} -content-padding = 0 - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ - -[module/menu] -type = custom/text - -content = "%{T3}%{T-}" -content-background = ${color.ac} -content-foreground = ${color.black} -content-padding = 4 - -click-left = ~/.config/polybar/panels/scripts/launcher.sh --zorin -click-right = ~/.config/polybar/panels/scripts/launcher.sh --zorin - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ -;; Apps -[module/term] -type = custom/text - -content = "%{T3}%{T-}" -content-foreground = ${color.white} -content-background = ${color.bg} -content-padding = 3 - -click-left = termite & - -[module/web] -type = custom/text - -content = "%{T3}%{T-}" -content-foreground = ${color.deep-orange} -content-background = ${color.bg} -content-padding = 3 - -click-left = firefox & - -[module/files] -type = custom/text - -content = "%{T3}%{T-}" -content-foreground = ${color.cyan} -content-background = ${color.bg} -content-padding = 3 - -click-left = thunar & - -[module/settings] -type = custom/text - -content = "%{T3}漣%{T-}" -content-foreground = ${color.lime} -content-background = ${color.bg} -content-padding = 3 - -click-left = xfce4-settings & - -;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ |